text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
  1. Strona Główna
  2. Catalogue
  3. MMT
  4. Bridages

Bridages

Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X3
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X3
ID: GB0122-0019
Cena:  436,00 £
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Référence:  GB0122-0019
  • Comptabilité:  HP-S-X3 Stylus Clampings
  • Diamètre:  40
Czas dostawy 10-15 dni
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X1
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X1
ID: GB0122-0008
Cena:  509,00 £
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Référence:  GB0122-0008
  • Comptabilité:  HP-S-X1 Stylus Clampings
  • Diamètre:  60
Czas dostawy 10-15 dni
Pillar 30x30x150mm
Pillar 30x30x150mm
ID: FX-PR30__150
Cena:  39,00 £
Szybki Podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Référence:  FX-PR30/150
  • Taille:  30 x 30 x 150 mm
W magazynie - wysyłka w ciągu 1-2 dni
Tension Post (M8)
Tension Post (M8)
ID: FX-POST
Cena:  25,00 £
Szybki Podgląd:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Référence:  FX-POST
  • Filetage:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 20 mm / L = 20 mm)
Standoff (D = 20 mm / L = 20 mm)
ID: FX-SO20__20
Cena:  16,00 £
Szybki Podgląd:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Référence:  FX-SO20/20
  • Longueur:  20 mm
  • Diamètre:  20 mm
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 20 mm / L = 100 mm)
Standoff (D = 20 mm / L = 100 mm)
ID: FX-SO20__100
Cena:  24,00 £
Szybki Podgląd:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Référence:  FX-SO20/100
  • Longueur:  100 mm
  • Diamètre:  20 mm
W magazynie - wysyłka w ciągu 1-2 dni
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Cena:  45,00 £
Szybki Podgląd:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Référence:  FX-PR30PLATE
  • Taille:  130 x 30 mm
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Cena:  1 382,00 £
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP500/500
  • Filetage:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Cena:  36,00 £
Szybki Podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Référence:  FX-PR30/100
  • Taille:  30 x 30 x 100 mm
W magazynie - wysyłka w ciągu 1-2 dni
Pillar 30x30x250mm
Pillar 30x30x250mm
ID: FX-PR30__250
Cena:  45,00 £
Szybki Podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
  • Référence:  FX-PR30/250
  • Taille:  30 x 30 x 250 mm
W magazynie - wysyłka w ciągu 1-2 dni
Pillar 30x30x50mm
Pillar 30x30x50mm
ID: FX-PR30__50
Cena:  35,00 £
Szybki Podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Référence:  FX-PR30/50
  • Taille:  30 x 30 x 50 mm
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Cena:  1 727,00 £
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP600/600
  • Filetage:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 16 mm / L = 30 mm)
Standoff (D = 16 mm / L = 30 mm)
ID: FX-SO16__30
Cena:  16,00 £
Szybki Podgląd:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Référence:  FX-SO16/30
  • Longueur:  30 mm
  • Diamètre:  16 mm
W magazynie - wysyłka w ciągu 1-2 dni
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Cena:  1 109,00 £
Szybki Podgląd:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-125SS3
  • Diamètre extérieur du mandrin (D1):  125
  • Plage de serrage extérieur (A):  1 - 126
  • Plage de serrage intérieur (I):  32 - 122
  • Matériau:  Acier inoxydable
W magazynie - wysyłka w ciągu 1-2 dni
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Cena:  1 109,00 £
Szybki Podgląd:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-125AL6
  • Diamètre extérieur du mandrin (D1):  125
  • Plage de fixation:  5 - 156
  • Matériau:  Aluminium
  • Fixation:  M4 / M8
W magazynie - wysyłka w ciągu 1-2 dni
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
ID: FC-160AL6
Cena:  1 355,00 £
Szybki Podgląd:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-160AL6
  • Diamètre extérieur du mandrin (D1):  160
  • Plage de fixation:  5 - 196
  • Matériau:  Aluminium
  • Fixation:  M4 / M8
W magazynie - wysyłka w ciągu 1-2 dni
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Cena:  1 036,00 £
Szybki Podgląd:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-125AL6-NF
  • Diamètre extérieur du mandrin (D1):  125
  • Plage de fixation:  5 - 156
  • Matériau:  Aluminium
  • Fixation (G):  M5
Czas dostawy 10-15 dni
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
ID: FC-125SS3-NF
Cena:  1 036,00 £
Szybki Podgląd: 

3-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Référence:  FC-125SS3-NF
  • Diamètre extérieur du mandrin (D1):  125
  • Plage de serrage extérieur (A):  1 - 126
  • Plage de serrage intérieur (I):  32 - 122
  • Matériau:  Acier inoxydable
Czas dostawy 10-15 dni
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Cena:  845,00 £
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP300/400
  • Filetage:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Vee Locator
Vee Locator
ID: FV-FEMALE
Cena:  30,00 £
Szybki Podgląd:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Référence:  FV-FEMALE
W magazynie - wysyłka w ciągu 1-2 dni