Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
  1. Home
  2. Catalogue
  3. CMM
  4. Fixtures

Fixtures

Hinge Pivot With Handle
Hinge Pivot With Handle
SKU: FX-PR30HINGE
Price:  84,00 €
Quick overview:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Référence:  FX-PR30HINGE
In Stock
Spring Nut (M8)
Spring Nut (M8)
SKU: FX-M8SPRGNUT
Price:  33,00 €
Quick overview:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Référence:  FX-M8SPRGNUT
In Stock
Pillar 30x30x150mm
Pillar 30x30x150mm
SKU: FX-PR30__150
Price:  43,00 €
Quick overview:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Référence:  FX-PR30/150
  • Taille:  30 x 30 x 150 mm
In Stock
Tension Post (M8)
Tension Post (M8)
SKU: FX-POST
Price:  27,00 €
Quick overview:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Référence:  FX-POST
  • Filetage:  M8
In Stock
Pillar Kit
Pillar Kit
SKU: FX-PILLAR__KIT
Price:  1 020,00 €
Quick overview:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
  • Référence:  FX-PILLAR/KIT
In Stock
Standoff Magnet (D = 16 mm / L = 20 mm)
Standoff Magnet (D = 16 mm / L = 20 mm)
SKU: FX-SO__MAG
Price:  22,00 €
Quick overview:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Référence:  FX-SO/MAG
  • Longueur:  20 mm
  • Diamètre:  16 mm
In Stock
Pillar Base Plate
Pillar Base Plate
SKU: FX-PR30PLATE
Price:  49,00 €
Quick overview:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Référence:  FX-PR30PLATE
  • Taille:  130 x 30 mm
In Stock
Pillar 30x30x100mm
Pillar 30x30x100mm
SKU: FX-PR30__100
Price:  40,00 €
Quick overview:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Référence:  FX-PR30/100
  • Taille:  30 x 30 x 100 mm
In Stock
Pillar 30x30x250mm
Pillar 30x30x250mm
SKU: FX-PR30__250
Price:  49,00 €
Quick overview:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
  • Référence:  FX-PR30/250
  • Taille:  30 x 30 x 250 mm
In Stock
Pillar 30x30x50mm
Pillar 30x30x50mm
SKU: FX-PR30__50
Price:  $44.00
Quick overview:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Référence:  FX-PR30/50
  • Taille:  30 x 30 x 50 mm
In Stock
Slider Block (M8)
Slider Block (M8)
SKU: FX-SLIDER
Price:  $30.00
Quick overview:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Référence:  FX-SLIDER
  • Filetage:  M8
In Stock
Pillar 30x30x200mm
Pillar 30x30x200mm
SKU: FX-PR30__200
Price:  $54.00
Quick overview:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Référence:  FX-PR30/200
  • Taille:  30 x 30 x 200 mm
In Stock
Spring Plunger
Spring Plunger
SKU: FX-PLUNGER
Price:  $110.00
Quick overview:  The spring plunger exerts low forces to hold sensible parts in position.
  • Référence:  FX-PLUNGER
  • Filetage:  M8
In Stock
Spring Clamp (M8)
Spring Clamp (M8)
SKU: FX-SPRING
Price:  $57.00
Quick overview:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Référence:  FX-SPRING
  • Filetage:  Sans filetage
In Stock
Thumb Screw M8
Thumb Screw M8
SKU: FX-THUMB
Price:  $13.00
Quick overview:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Référence:  FX-THUMB
  • Filetage:  M8
In Stock
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
SKU: FX-SO16__20
Price:  $20.00
Quick overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Référence:  FX-SO16/20
  • Longueur:  20 mm
  • Diamètre:  16 mm
In Stock
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
SKU: FX-SO16__100
Price:  $30.00
Quick overview:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Référence:  FX-SO16/100
  • Longueur:  100 mm
  • Diamètre:  16 mm
In Stock
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
SKU: FX-SUB45__120
Price:  $70.00
Quick overview:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Référence:  FX-SUB45/120
  • Taille:  120 x 45 x 12 mm
In Stock
Swift-Fix - Starter Kit
Swift-Fix - Starter Kit
SKU: FX-STARTER__KIT
Price:  $1,738.00
Quick overview:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Référence:  FX-STARTER/KIT
  • Filetage:  M8
  • Application:  MMT, Bras de mesure portables
In Stock
Support Stop
Support Stop
SKU: FX-SUP__STOP
Price:  $101.00
Quick overview:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Référence:  FX-SUP/STOP
  • Filetage:  M8
In Stock