text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X3
ID: GB0122-0019
Prijs:  480,00 CHF
Beknopt overzicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Référence:  GB0122-0019
  • Comptabilité:  HP-S-X3 Stylus Clampings
  • Diamètre:  40
Levertijd 10-15 dagen
Adaptateur SWIFT-SET pour coupelles de stylet HP-S-X1
ID: GB0122-0008
Prijs:  560,00 CHF
Beknopt overzicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Référence:  GB0122-0008
  • Comptabilité:  HP-S-X1 Stylus Clampings
  • Diamètre:  60
Levertijd 10-15 dagen
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  1.004,00 CHF
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP300/400
  • Filetage:  M8
Op voorraad - verzending 1-2 dagen
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prijs:  33,00 CHF
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Référence:  FX-CTSML
  • Filetage:  Sans filetage
Op voorraad - verzending 1-2 dagen
Vee Block Twin
ID: FV-VEETWIN
Prijs:  47,00 CHF
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Référence:  FV-VEETWIN
Op voorraad - verzending 1-2 dagen
Swift-Fix Tool Kit
ID: FX-TOOLS
Prijs:  27,00 CHF
Beknopt overzicht:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
  • Référence:  FX-TOOLS
Op voorraad - verzending 1-2 dagen
Universal Joint
ID: FX-UNI__JOINT
Prijs:  95,00 CHF
Beknopt overzicht:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Référence:  FX-UNI/JOINT
  • Filetage:  M8
Op voorraad - verzending 1-2 dagen
Vee Locator
ID: FX-VEE
Prijs:  77,00 CHF
Beknopt overzicht:  The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
  • Référence:  FX-VEE
  • Filetage:  M8
Op voorraad - verzending 1-2 dagen
Toggle Clamp
ID: FX-TOG
Prijs:  139,00 CHF
Beknopt overzicht:  Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
  • Référence:  FX-TOG
  • Filetage:  M8
Op voorraad - verzending 1-2 dagen
Standoff Support (M8)
SKU: FX-SO__SUPP
Price:  CHF22.00
Quick overview:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Référence:  FX-SO/SUPP
  • Longueur:  10 mm
  • Diamètre:  15 mm
In Stock
Standoff Adjustable (M8)
ID: FX-HEIGHT
Prijs:  CHF 62,00
Beknopt overzicht:  The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
  • Référence:  FX-HEIGHT
  • Longueur:  50 mm
  • Diamètre:  16 mm
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Prijs:  CHF 1.955,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP400/600
  • Filetage:  M8
Op voorraad - verzending 1-2 dagen
Baseplate Retaining Screw (M8)
ID: FX-BPRTR
Prijs:  CHF 6,00
Beknopt overzicht:  Retaining screws secure base plates on the machine table and make it simple to mount multiple plates next to each other.
  • Référence:  FX-BPRTR
  • Filetage:  M8
Op voorraad - verzending 1-2 dagen
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Prijs:  CHF 1.254,00
Beknopt overzicht:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Référence:  FV-STARTERKIT
  • Filetage:  M4
  • Application:  Multicapteur MMT
Op voorraad - verzending 1-2 dagen
Standoff Magnet  (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Prijs:  CHF 22,00
Beknopt overzicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Référence:  FX-SO/MAG
  • Longueur:  20 mm
  • Diamètre:  16 mm
Op voorraad - verzending 1-2 dagen
Resting Cone (M8)
ID: FX-CONE
Prijs:  CHF 22,00
Beknopt overzicht:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Référence:  FX-CONE
  • Filetage:  M8
Op voorraad - verzending 1-2 dagen
Pillar Base Plate
ID: FX-PR30PLATE
Prijs:  CHF 49,00
Beknopt overzicht:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Référence:  FX-PR30PLATE
  • Taille:  130 x 30 mm
Op voorraad - verzending 1-2 dagen
Pillar 30x30x100mm
ID: FX-PR30__100
Prijs:  CHF 40,00
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Référence:  FX-PR30/100
  • Taille:  30 x 30 x 100 mm
Op voorraad - verzending 1-2 dagen
Pillar 30x30x250mm
ID: FX-PR30__250
Prijs:  CHF 49,00
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
  • Référence:  FX-PR30/250
  • Taille:  30 x 30 x 250 mm
Op voorraad - verzending 1-2 dagen
Pillar 30x30x50mm
ID: FX-PR30__50
Prijs:  CHF 38,00
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Référence:  FX-PR30/50
  • Taille:  30 x 30 x 50 mm
Op voorraad - verzending 1-2 dagen