text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
Spring Nut (M8)
N° : FX-M8SPRGNUT
Prix:  31,00 €
Vue d'ensemble sommaire:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
En stock - Livraison sous 1 à 2 jours
Pillar Top Plate  (10 x M8)
N° : FX-SUB45__120
Prix:  54,00 €
Vue d'ensemble sommaire:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Taille:  120 x 45 x 12 mm
En stock - Livraison sous 1 à 2 jours
Swift-Fix - Starter Kit
N° : FX-STARTER__KIT
Prix:  1 095,00 €
Vue d'ensemble sommaire:  The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Filetage:  M8
  • Application:  MMT, Bras de mesure portables
En stock - Livraison sous 1 à 2 jours
Fixture Baseplate 300x400x12mm (M8)
N° : FX-BP300__400
Prix:  884,00 €
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Filetage:  M8
En stock - Livraison sous 1 à 2 jours
Tension Clamp (L = 39 mm)
N° : FX-CTSML
Prix:  31,00 €
Vue d'ensemble sommaire:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Filetage:  Without Thread
En stock - Livraison sous 1 à 2 jours
Vee Locator
N° : FV-FEMALE
Prix:  25,00 €
Vue d'ensemble sommaire:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
En stock - Livraison sous 1 à 2 jours
Tension Post (M8)
N° : FX-POST
Prix:  25,00 €
Vue d'ensemble sommaire:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Filetage:  M8
En stock - Livraison sous 1 à 2 jours
Standoff (D = 20 mm / L = 20 mm)
N° : FX-SO20__20
Prix:  16,00 €
Vue d'ensemble sommaire:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  20 mm
  • Diamètre:  20 mm
En stock - Livraison sous 1 à 2 jours
Standoff (D = 8 mm / L = 20 mm)
N° : FV-SO8__20
Prix:  9,00 €
Vue d'ensemble sommaire:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  20 mm
  • Diamètre:  8 mm
En stock - Livraison sous 1 à 2 jours
Swift-Fix Tool Kit
N° : FX-TOOLS
Prix:  25,00 €
Vue d'ensemble sommaire:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
En stock - Livraison sous 1 à 2 jours
Pillar Kit
N° : FX-PILLAR__KIT
Prix:  979,00 €
Vue d'ensemble sommaire:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
En stock - Livraison sous 1 à 2 jours
Standoff Support (M8)
N° : FX-SO__SUPP
Prix:  20,00 €
Vue d'ensemble sommaire:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Longueur:  10 mm
  • Diamètre:  15 mm
En stock - Livraison sous 1 à 2 jours
Standoff (D = 20 mm / L = 30 mm)
N° : FX-SO20__30
Prix:  16,00 €
Vue d'ensemble sommaire:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Longueur:  30 mm
  • Diamètre:  20 mm
En stock - Livraison sous 1 à 2 jours
Universal Joint
N° : FX-UNI__JOINT
Prix:  91,00 €
Vue d'ensemble sommaire:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Filetage:  M8
En stock - Livraison sous 1 à 2 jours
Vee Locator
N° : FX-VEE
Prix:  74,00 €
Vue d'ensemble sommaire:  The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
  • Filetage:  M8
En stock - Livraison sous 1 à 2 jours
Standoff Magnet  (D = 16 mm / L = 20 mm)
N° : FX-SO__MAG
Prix:  20,00 €
Vue d'ensemble sommaire:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Longueur:  20 mm
  • Diamètre:  16 mm
En stock - Livraison sous 1 à 2 jours
Pillar Base Plate
N° : FX-PR30PLATE
Prix:  47,00 €
Vue d'ensemble sommaire:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Taille:  130 x 30 mm
En stock - Livraison sous 1 à 2 jours
Pillar 30x30x100mm
N° : FX-PR30__100
Prix:  38,00 €
Vue d'ensemble sommaire:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Taille:  30 x 30 x 100 mm
En stock - Livraison sous 1 à 2 jours
Pillar 30x30x250mm
N° : FX-PR30__250
Prix:  47,00 €
Vue d'ensemble sommaire:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
  • Taille:  30 x 30 x 250 mm
En stock - Livraison sous 1 à 2 jours
Pillar 30x30x50mm
N° : FX-PR30__50
Prix:  36,00 €
Vue d'ensemble sommaire:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Taille:  30 x 30 x 50 mm
En stock - Livraison sous 1 à 2 jours