text.skipToContent text.skipToNavigation
10 Produit(s) trouvé(s)
  • Pillar Kit Pillar Kit N° : FX-PILLAR__KIT
    840,00 €

    En stock - Livraison sous 1 à 2 jours

    The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
  • Pillar 30x30x100mm Pillar 30x30x100mm N° : FX-PR30__100
    32,00 €

    En stock - Livraison sous 1 à 2 jours

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
    Taille 30 x 30 x 100 mm
  • Spring Nut (M8) Spring Nut (M8) N° : FX-M8SPRGNUT
    27,00 €

    En stock - Livraison sous 1 à 2 jours

    Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Hinge Pivot With Handle Hinge Pivot With Handle N° : FX-PR30HINGE
    41,00 €

    En stock - Livraison sous 1 à 2 jours

    The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Pillar Base Plate Pillar Base Plate N° : FX-PR30PLATE
    41,00 €

    En stock - Livraison sous 1 à 2 jours

    The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
    Taille 130 x 30 mm
  • Pillar 30x30x200mm Pillar 30x30x200mm N° : FX-PR30__200
    38,00 €

    En stock - Livraison sous 1 à 2 jours

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
    Taille 30 x 30 x 200 mm
  • Pillar 30x30x150mm Pillar 30x30x150mm N° : FX-PR30__150
    35,00 €

    En stock - Livraison sous 1 à 2 jours

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
    Taille 30 x 30 x 150 mm
  • Pillar Top Plate  (10 x M8) Pillar Top Plate (10 x M8) N° : FX-SUB45__120
    47,00 €

    En stock - Livraison sous 1 à 2 jours

    The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
    Taille 120 x 45 x 12 mm
  • Pillar 30x30x50mm Pillar 30x30x50mm N° : FX-PR30__50
    30,00 €

    En stock - Livraison sous 1 à 2 jours

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
    Taille 30 x 30 x 50 mm
  • Pillar 30x30x250mm Pillar 30x30x250mm N° : FX-PR30__250
    41,00 €

    En stock - Livraison sous 1 à 2 jours

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
    Taille 30 x 30 x 250 mm