text.skipToContent text.skipToNavigation
  • 1(current)
  • 2
  • 3
102 Produit(s) trouvé(s)
  • Kinematic Base for Fixture Plate 300x300mm Kinematic Base for Fixture Plate 300x300mm N° : KB-250__250
    505,00 €

    En stock - Livraison sous 1 à 2 jours

    The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
    Plaque adaptable KPP-300/300 
    KPT-300/300 
  • 6-Jaw Chuck with Flange (Aluminium / D = 125 mm) 6-Jaw Chuck with Flange (Aluminium / D = 125 mm) N° : FC-125AL6
    1 050,00 €

    En stock - Livraison sous 1 à 2 jours

    Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
    Diamètre extérieur du mandrin (D1) 125 mm
    Plage de fixation 5 - 156 mm
    Matériau Aluminium 
    Fixation M4 / M8 
  • Spring Clamp (M8) Spring Clamp (M8) N° : FX-SPRING
    44,00 €

    En stock - Livraison sous 1 à 2 jours

    Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
    Filetage Without Thread 
  • Standoff (D = 16 mm / L = 20 mm) Standoff (D = 16 mm / L = 20 mm) N° : FX-SO16__20
    13,00 €

    En stock - Livraison sous 1 à 2 jours

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Longueur 20 mm 
    Diamètre 16 mm 
  • Standoff (D = 16 mm / L = 100 mm) Standoff (D = 16 mm / L = 100 mm) N° : FX-SO16__100
    20,00 €

    En stock - Livraison sous 1 à 2 jours

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Longueur 100 mm 
    Diamètre 16 mm 
  • Tension Post (M8) Tension Post (M8) N° : FX-POST
    22,00 €

    En stock - Livraison sous 1 à 2 jours

    This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
    Filetage M8 
  • Standoff (D = 20 mm / L = 20 mm) Standoff (D = 20 mm / L = 20 mm) N° : FX-SO20__20
    13,00 €

    En stock - Livraison sous 1 à 2 jours

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Longueur 20 mm 
    Diamètre 20 mm 
  • Standoff (D = 20 mm / L = 100 mm) Standoff (D = 20 mm / L = 100 mm) N° : FX-SO20__100
    21,00 €

    En stock - Livraison sous 1 à 2 jours

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Longueur 100 mm 
    Diamètre 20 mm 
  • Standoff Support (M8) Standoff Support (M8) N° : FX-SO__SUPP
    17,00 €

    En stock - Livraison sous 1 à 2 jours

    The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
    Longueur 10 mm 
    Diamètre 15 mm 
  • Standoff Magnet  (D = 16 mm / L = 20 mm) Standoff Magnet (D = 16 mm / L = 20 mm) N° : FX-SO__MAG
    17,00 €

    En stock - Livraison sous 1 à 2 jours

    The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
    Longueur 20 mm 
    Diamètre 16 mm 
  • Pillar Base Plate Pillar Base Plate N° : FX-PR30PLATE
    41,00 €

    En stock - Livraison sous 1 à 2 jours

    The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
    Taille 130 x 30 mm 
  • Standoff (D = 16 mm / L = 30 mm) Standoff (D = 16 mm / L = 30 mm) N° : FX-SO16__30
    13,00 €

    En stock - Livraison sous 1 à 2 jours

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Longueur 30 mm 
    Diamètre 16 mm 
  • Standoff Pin M8 (D= 16 mm/L= 20 mm) Standoff Pin M8 (D= 16 mm/L= 20 mm) N° : FX-SO__PIN
    17,00 €

    En stock - Livraison sous 1 à 2 jours

    The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
    Longueur 20 mm 
    Diamètre 16 mm 
  • Slider Block (M8) Slider Block (M8) N° : FX-SLIDER
    21,00 €

    En stock - Livraison sous 1 à 2 jours

    A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
    Filetage M8 
  • Standoff (D = 16 mm / L = 50 mm) Standoff (D = 16 mm / L = 50 mm) N° : FX-SO16__50
    14,00 €

    En stock - Livraison sous 1 à 2 jours

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Longueur 50 mm 
    Diamètre 16 mm 
  • Standoff (D = 20 mm / L = 50 mm) Standoff (D = 20 mm / L = 50 mm) N° : FX-SO20__50
    14,00 €

    En stock - Livraison sous 1 à 2 jours

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Longueur 50 mm 
    Diamètre 20 mm 
  • Tension Clamp (L = 39 mm) Tension Clamp (L = 39 mm) N° : FX-CTSML
    27,00 €

    En stock - Livraison sous 1 à 2 jours

    Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
    Filetage Without Thread 
  • Swift-Fix - Bronze Kit Swift-Fix - Bronze Kit N° : FX-BRONZE__KIT
    830,00 €

    En stock - Livraison sous 1 à 2 jours

    The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
    Filetage M8 
    Application MMT 
    Bras de mesure portables 
  • Standoff Adjustable (M8) Standoff Adjustable (M8) N° : FX-HEIGHT
    50,00 €

    En stock - Livraison sous 1 à 2 jours

    The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
    Longueur 50 mm 
    Diamètre 16 mm 
  • Swift-Fix - Gold Kit Swift-Fix - Gold Kit N° : FX-GOLD__KIT
    2 100,00 €

    En stock - Livraison sous 1 à 2 jours

    With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
    Filetage M8 
    Application MMT 
    Bras de mesure portables 
    • 1(current)
    • 2
    • 3