MMC | Hexagon Manufacturing Intelligence

HR-X1-3P Stylus Changer Ports ID: M00-114-213-000

235,00 €

En Stock - Envío 1-2 Días

Triple stylus changer port for scanning sensor HP-S-X1S.

Cantidad de puertos	3
Sensor relacionado	HP-S-X1S

HA-TM-450C Probe Adapter TKJ/M8 (L = 450 mm) ID: 03969368

1 516,00 €

En Stock - Envío 1-2 Días

TKJ to M8 adapter made of carbon fibre and stainless steel with a length of 450 mm

Conexión	TKJ / M8
Longitud (L)	450 mm
Material	Fibra de carbono / Acero inoxidable

Kinematic Fixture Plate 300x300mm (Plain) ID: KPP-300__300

446,00 €

En Stock - Envío 1-2 Días

The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.

Compatibilidad placas

KB-250/250
KB-UNIVL

Fixture Baseplate 300x400x12mm (M8) ID: FX-BP300__400

798,00 €

En Stock - Envío 1-2 Días

This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Rosca

M8

Kinematic Fixture Plate 500x500mm (Plain) ID: KPP-500__500

683,00 €

En Stock - Envío 1-2 Días

The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.

Compatibilidad placas

KB-400/400
KB-UNIVL

Tension Clamp (L = 39 mm) ID: FX-CTSML

28,00 €

En Stock - Envío 1-2 Días

Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

Rosca

Without Thread

Vee Locator ID: FV-FEMALE

23,00 €

En Stock - Envío 1-2 Días

Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.

Vee Block Twin ID: FV-VEETWIN

38,00 €

En Stock - Envío 1-2 Días

The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

Spring Clamp (M8) ID: FX-SPRING

46,00 €

En Stock - Envío 1-2 Días

Spring Clamps are used to clamp parts with low force without obstructing the measurement access.

Rosca

Without Thread

Thumb Screw M8 ID: FX-THUMB

9,00 €

En Stock - Envío 1-2 Días

With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.

Rosca

M8

Guide Rail (L = 480 mm) ID: FV-GUIDE480

213,00 €

En Stock - Envío 1-2 Días

The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.

Compatibilidad placas

FV-BP200/200C
FV-BP200/200F
FV-BP200/200P

Standoff (D = 8 mm / L = 20 mm) ID: FV-SO8__20

9,00 €

En Stock - Envío 1-2 Días

Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longitud	20 mm
Diámetro	8 mm

Cone Adjustable (M4) ID: FV-CONEADJ

12,00 €

En Stock - Envío 1-2 Días

The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.

Rosca

M4

Standoff (D = 16 mm / L = 20 mm) ID: FX-SO16__20

14,00 €

En Stock - Envío 1-2 Días

Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longitud	20 mm
Diámetro	16 mm

Hinge Pivot With Handle ID: FX-PR30HINGE

43,00 €

En Stock - Envío 1-2 Días

The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.

Tension Clamp (L = 66 mm) ID: FX-CTMED

28,00 €

En Stock - Envío 1-2 Días

Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.

Rosca

Without Thread

Fixture Baseplate 300x300x12mm (M8) ID: FX-BP300__300

625,00 €

En Stock - Envío 1-2 Días

This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Rosca

M8

Standoff (D = 16 mm / L = 100 mm) ID: FX-SO16__100

21,00 €

En Stock - Envío 1-2 Días

Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Longitud	100 mm
Diámetro	16 mm

Spring Nut (M8) ID: FX-M8SPRGNUT

28,00 €

En Stock - Envío 1-2 Días

Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.

Pillar Top Plate (10 x M8) ID: FX-SUB45__120

49,00 €

En Stock - Envío 1-2 Días

The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.

Tamaño

120 x 45 x 12 mm