text.skipToContent text.skipToNavigation
  • 2
  • 3(current)
  • 4
96 Producto(s) encontrado
  • Vee Locator Vee Locator ID: FX-VEE
    € 64,00

    En Stock - Envío 1-2 Días

    The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
    Rosca M8 
  • Tension Post (M8) Tension Post (M8) ID: FX-POST
    € 22,00

    En Stock - Envío 1-2 Días

    This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
    Rosca M8 
  • Centering Pin Centering Pin ID: FV-MALE
    € 17,00

    En Stock - Envío 1-2 Días

    Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
    Rosca M4 
  • Resting Cone (M8) Resting Cone (M8) ID: FX-CONE
    € 17,00

    En Stock - Envío 1-2 Días

    The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
    Rosca M8 
  • Standoff Adjustable (M8) Standoff Adjustable (M8) ID: FX-HEIGHT
    € 50,00

    En Stock - Envío 1-2 Días

    The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
    Longitud 50 mm
    Diámetro 16 mm
  • Slider Block (M4) Slider Block (M4) ID: FV-SLIDER
    € 12,00

    En Stock - Envío 1-2 Días

    A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
    Rosca M4 
  • Pillar Base Plate Pillar Base Plate ID: FX-PR30PLATE
    € 41,00

    En Stock - Envío 1-2 Días

    The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
    Tamaño 130 x 30 mm
  • Corner Bracket Corner Bracket ID: FV-CNRBRKT
    € 43,00

    En Stock - Envío 1-2 Días

    The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Resting Cone (M4) Resting Cone (M4) ID: FV-CONE
    € 10,00

    En Stock - Envío 1-2 Días

    The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
    Rosca M4 
  • Universal Joint Universal Joint ID: FX-UNI__JOINT
    € 78,00

    En Stock - Envío 1-2 Días

    Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
    Rosca M8 
  • Standoff (D = 16 mm / L = 100 mm) Standoff (D = 16 mm / L = 100 mm) ID: FX-SO16__100
    € 20,00

    En Stock - Envío 1-2 Días

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Longitud 100 mm
    Diámetro 16 mm
  • Standoff Pin M8 (D= 16 mm/L= 20 mm) Standoff Pin M8 (D= 16 mm/L= 20 mm) ID: FX-SO__PIN
    € 17,00

    En Stock - Envío 1-2 Días

    The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
    Longitud 25 mm
    Diámetro 16 mm
  • Swift-Fix - Basic Kit Swift-Fix - Basic Kit ID: FX-BASIC__KIT
    € 390,00

    En Stock - Envío 1-2 Días

    The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
    Rosca M8 
    Aplicación MMC 
    Brazos Medición Portátil 
  • Vee Block Single Vee Block Single ID: FV-VEE
    € 26,00

    En Stock - Envío 1-2 Días

    The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Pillar 30x30x200mm Pillar 30x30x200mm ID: FX-PR30__200
    € 38,00

    En Stock - Envío 1-2 Días

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
    Tamaño 30 x 30 x 200 mm
  • Vee Block Twin Vee Block Twin ID: FV-VEETWIN
    € 36,00

    En Stock - Envío 1-2 Días

    The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Pillar 30x30x150mm Pillar 30x30x150mm ID: FX-PR30__150
    € 35,00

    En Stock - Envío 1-2 Días

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
    Tamaño 30 x 30 x 150 mm
  • Kinematic Fixture Plate 400x400 mm (M8) Kinematic Fixture Plate 400x400 mm (M8) ID: KPT-400__400
    € 1 130,00

    En Stock - Envío 1-2 Días

    The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
    Compatibilidad placas KB-300/300 
    KB-UNIVL 
  • Pillar Top Plate  (10 x M8) Pillar Top Plate (10 x M8) ID: FX-SUB45__120
    € 47,00

    En Stock - Envío 1-2 Días

    The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
    Tamaño 120 x 45 x 12 mm
  • Pillar 30x30x50mm Pillar 30x30x50mm ID: FX-PR30__50
    € 30,00

    En Stock - Envío 1-2 Días

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
    Tamaño 30 x 30 x 50 mm
    • 2
    • 3(current)
    • 4