text.skipToContent text.skipToNavigation
  • 1(current)
  • 2
  • 3
96 Producto(s) encontrado
  • Pillar Kit Pillar Kit ID: FX-PILLAR__KIT
    € 840,00

    En Stock - Envío 1-2 Días

    The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
  • Standoff Support (M4) Standoff Support (M4) ID: FV-SOSUP
    € 11,00

    En Stock - Envío 1-2 Días

    The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
    Longitud 6 mm
    Diámetro 8 mm
  • Spring Plunger Spring Plunger ID: FX-PLUNGER
    € 78,00

    En Stock - Envío 1-2 Días

    The spring plunger exerts low forces to hold sensible parts in position.
    Rosca M8 
  • Support Stop Support Stop ID: FX-SUP__STOP
    € 71,00

    En Stock - Envío 1-2 Días

    The support stop allows the user to apply a positive clamping force with variable pressure.
    Rosca M8 
  • Toggle Clamp Toggle Clamp ID: FX-TOG
    € 92,00

    En Stock - Envío 1-2 Días

    Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
    Rosca M8 
  • Slider Block (M8) Slider Block (M8) ID: FX-SLIDER
    € 21,00

    En Stock - Envío 1-2 Días

    A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
    Rosca M8 
  • Cap Screw Set M8 (L = 20 mm) Cap Screw Set M8 (L = 20 mm) ID: FX-CAPM8__20
    € 14,00

    En Stock - Envío 1-2 Días

    Cap screws are used to mount Swift-Fix components on the base plate.
    Rosca M8 
  • Spring Nut (M8) Spring Nut (M8) ID: FX-M8SPRGNUT
    € 27,00

    En Stock - Envío 1-2 Días

    Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Six-Jaw Chuck with Flange (Aluminium / D = 125 mm) Six-Jaw Chuck with Flange (Aluminium / D = 125 mm) ID: FC-125AL6
    € 1 050,00

    En Stock - Envío 1-2 Días

    Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
    Diámetro exterior mandril (D1) 125 mm
    Area de fijación 5 - 156 mm
    Material Aluminio 
    Fijación M4 / M8 
  • Kinematic Fixture Plate 300x300mm (Plain) Kinematic Fixture Plate 300x300mm (Plain) ID: KPP-300__300
    € 425,00

    En Stock - Envío 1-2 Días

    The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
    Compatibilidad placas KB-250/250 
    KB-UNIVL 
  • Kinematic Fixture Plate 400x400mm (Plain) Kinematic Fixture Plate 400x400mm (Plain) ID: KPP-400__400
    € 505,00

    En Stock - Envío 1-2 Días

    The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
    Compatibilidad placas KB-300/300 
    KB-UNIVL 
  • Kinematic Fixture Plate 300x300 mm (M8) Kinematic Fixture Plate 300x300 mm (M8) ID: KPT-300__300
    € 675,00

    En Stock - Envío 1-2 Días

    The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
    Compatibilidad placas KB-250/250 
    KB-UNIVL 
  • Fixture Baseplate 500x500x12mm (M8) Fixture Baseplate 500x500x12mm (M8) ID: FX-BP500__500
    € 1 250,00

    En Stock - Envío 1-2 Días

    This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
    Rosca M8 
  • Fixture Baseplate 300x300x12mm (M8) Fixture Baseplate 300x300x12mm (M8) ID: FX-BP300__300
    € 595,00

    En Stock - Envío 1-2 Días

    This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
    Rosca M8 
  • Three-Jaw Chuck with Flange (Stainless Steel / D = 125 mm) Three-Jaw Chuck with Flange (Stainless Steel / D = 125 mm) ID: FC-125SS3
    € 1 050,00

    En Stock - Envío 1-2 Días

    Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
    Diámetro exterior mandril (D1) 125 mm
    Area de fijación exterior (A) 1 - 126 mm
    Area de fijación interior (I) 32 - 122 mm
    Material Acero inoxidable 
    Fijación M4 / M8 
  • Slider Block (M4) Slider Block (M4) ID: FV-SLIDER
    € 12,00

    En Stock - Envío 1-2 Días

    A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
    Rosca M4 
  • Pillar Base Plate Pillar Base Plate ID: FX-PR30PLATE
    € 41,00

    En Stock - Envío 1-2 Días

    The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
    Tamaño 130 x 30 mm
  • Corner Bracket Corner Bracket ID: FV-CNRBRKT
    € 43,00

    En Stock - Envío 1-2 Días

    The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Standoff (D = 16 mm / L = 100 mm) Standoff (D = 16 mm / L = 100 mm) ID: FX-SO16__100
    € 20,00

    En Stock - Envío 1-2 Días

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Longitud 100 mm
    Diámetro 16 mm
  • Standoff Pin M8 (D= 16 mm/L= 20 mm) Standoff Pin M8 (D= 16 mm/L= 20 mm) ID: FX-SO__PIN
    € 17,00

    En Stock - Envío 1-2 Días

    The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
    Longitud 25 mm
    Diámetro 16 mm
    • 1(current)
    • 2
    • 3