As part of our new security upgrades, you are requested to reset your password
Select your country or region
- Austria
- Bosnia
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Lithuana
- Luxembourg
- Latvia
- Netherlands
- Norway
- Poland
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
- Serbia
- Switzerland
- United Kingdom
M4-Stylus (SN-6-CE-4.5-L50)
ID: H00027393
€206.00
In Stock - Despatched 1-2 Days
Straight stylus with M4 thread, silicon nitride ball Ø6 mm, ceramic stem, length 50 mm. For use on machine tools. Previous part number: 91.00-T53/6-KE-M4-SI
| Thread | M4 |
| Tip Material | Silicon Nitride |
| Tip Diameter (D) | 6 mm |
| Length (L) | 50 mm |
| Stem Material | Ceramic |
Break Shaft (TC-L1)
ID: H00027379
€21.00
In Stock - Despatched 1-2 Days
Break shaft for use in styli and stylus adapters with break shaft connection. For use on machine tools. Previous part number: 91.00-S
| Length (L) | 1 mm |
| Stem Material | Tungsten Carbide |
Battery (3 V / CR2032)
ID: 5309
€3.50
In Stock - Despatched 1-2 Days
Battery (3 V / CR2032) for use in measurement devices for machine tools.
| Size | CR 2032 |
| Voltage | 3 V |
| Capacity | 220 mAh |
| Compatibility | IRP40.50 |
M3-Stylus (R-6-TC-2-L30)
ID: H00027406
€57.00
In Stock - Despatched 1-2 Days
Straight stylus with M3 thread, ruby ball Ø6 mm, tungsten carbide stem, length 30 mm. For use on machine tools. Previous part number: 21.00-T30/6-HM-M3
| Thread | M3 |
| Tip Material | Ruby |
| Tip Diameter (D) | 6 mm |
| Length (L) | 30 mm |
| Stem Material | Tungsten Carbide |
BS-Tool Setter Stylus (TC-13-L15)
ID: H00027357
€164.00
In Stock - Despatched 1-2 Days
Disc stylus made of tungsten carbide Ø13 mm with break shaft connection. For measuring rotating tools with tool setters on machine tools. Previous part number: 91.00-D13/24.5
| Thread | Break Shaft Connection |
| Tip Material | Tungsten Carbide |
| Tip Size | Ø13 mm |
| Length (L) | 15 mm |
M3-Stylus (R-5-CE-3-L40)
ID: H00027411
€78.00
In Stock - Despatched 1-2 Days
Straight stylus with M3 thread, ruby ball Ø5 mm, ceramic stem, length 40 mm. For use on machine tools. Previous part number: 21.00-T40/5-KE-M3
| Thread | M3 |
| Tip Material | Ruby |
| Tip Diameter (D) | 5 mm |
| Length (L) | 40 mm |
| Stem Material | Ceramic |
BS-Stylus (R-6-SS-3.5-L100)
ID: H00027371
€68.00
In Stock - Despatched 1-2 Days
Straight stylus with break shaft connection, ruby ball Ø6 mm, stainless steel stem, length 100 mm. For use on machine tools. Previous part number: 91.00-T103/6
| Thread | Break Shaft Connection |
| Tip Material | Ruby |
| Tip Diameter (D) | 6 mm |
| Length (L) | 100 mm |
| Stem Material | Stainless Steel |
Calibration Pin (D = 6 mm)
ID: 6164
€102.00
In Stock - Despatched 1-2 Days
Calibration pin (Ø6 mm) made of hardened stainless steel for calibration of laser tool setters on machine tools. Length 50 mm.
| Material | Stainless Steel, hardened |
| Diameter | 6 mm |
| Length | 50 mm |
| Application | Laser Tool Setter Calibration |
BS-Square Stylus (TC-10x10x5-SS-3.5-L46)
ID: H00027361
€180.00
In Stock - Despatched 1-2 Days
Stylus with break shaft connection, square stylus tip made of tungsten carbide 10x10 mm, stainless steel stem, length 46 mm. For tool measurement on turning machines. Previous part number: 21.00-WM46
| Thread | Break Shaft Connection |
| Tip Material | Tungsten Carbide |
| Tip Size | 10 x 10 x 5 mm |
| Length (L) | 46 mm |
| Stem Material | Stainless Steel |
Tool Box 35.20-TB
ID: 35.20-TB
€55.00
In Stock - Despatched 1-2 Days
Tool kit for installation and maintenance of Tool Setter TS35.20. Tool box contents see description.
| Compatibility | TS35.20 |
Mounting Pin (D = 6 mm)
ID: 5250
€2.50
In Stock - Despatched 1-2 Days
Mounting pin made of steel Ø6 mm, length 80 mm. Used for mounting calibration sets on the machine tool table.
| Material | Steel |
| Diameter | 6 mm |
| Length | 80 mm |
M3-Stylus Center (SS-10x10-L13)
ID: H00027423
€86.00
In Stock - Despatched 1-2 Days
5-way stylus center made of stainless steel, with external thread M3 for holding up to 5x M3 styli, length 13 mm. For use on machine tools. Previous part number: 21.00-TK-M3
| Male Thread | M3 |
| Female Thread (C) | 5 x M3 |
| Diameter (D) | 10 mm |
| Length (L) | 13 mm |
M3-Stylus (R-5-TC-2-L30)
ID: H00027405
€57.00
In Stock - Despatched 1-2 Days
Straight stylus with M3 thread, ruby ball Ø5 mm, tungsten carbide stem, length 30 mm. For use on machine tools. Previous part number: 21.00-T30/5-HM-M3
| Thread | M3 |
| Tip Material | Ruby |
| Tip Diameter (D) | 5 mm |
| Length (L) | 30 mm |
| Stem Material | Tungsten Carbide |
Tool Box 6X.00-TB
ID: 6X.00-TB
€33.00
In Stock - Despatched 1-2 Days
Tool kit for installation and maintenance of Infrared Touch Probe IRP60.00 and Infrared Tool Setter IRT65.00. Tool box contents see description.
| Compatibility |
IRP60.00 IRT65.00 |
Tool Box 35.65-TB
ID: 35.65-TB
€7.50
In Stock - Despatched 1-2 Days
Tool kit for installation and maintenance of Laser Tool Setter LTS35.65. Tool box contents see description.
| Compatibility | LTS35.65 |
M4/M4-Ball Disc Stylus (SS-63-SS-L10)
ID: H00027448
€384.00
In Stock - Despatched 1-2 Days
Ball disc stylus made of stainless steel Ø63 mm, with external/internal thread M4, length 10 mm. For use on machine tools. Previous part number: 91.00-TS63-ST-M4
| Thread | M4 |
| Tip Material | Stainless Steel |
| Disc Diameter (D) | 63 mm |
| Length (L) | 10 mm |
| Stem Material | Stainless Steel |
Calibration Set for T-Nut 18 mm (0.70")
ID: CALIBRATION SET 18
€478.00
In Stock - Despatched 1-2 Days
Calibration set with calibration sphere (D = 30 mm) and T-nut (18 mm) for mounting on the machine tool table. Set content see description.
| Mounting | T-Slot Mounting |
| Sphere Diameter | 30 mm |
Tool Box 35.71-TB
ID: 35.71-TB
€64.00
In Stock - Despatched 1-2 Days
Tool kit for installation and maintenance of Infrared Tool Setter IRT35.71. Tool box contents see description.
| Compatibility | IRT35.71 |
M4-Stylus (R-5-SS-3-L30)
ID: H00027422
€70.00
In Stock - Despatched 1-2 Days
Straight stylus with M4 thread, ruby ball Ø5 mm, stainless steel stem, length 30 mm. For use on machine tools. Previous part number: 91.00-T32.5/5-ST-M4
| Thread | M4 |
| Tip Material | Ruby |
| Tip Diameter (D) | 5 mm |
| Length (L) | 30 mm |
| Stem Material | Stainless Steel |
M3/BS-Stylus Adapter (ST-5-L4)
ID: H00027450
€19.00
In Stock - Despatched 1-2 Days
Stylus adapter made of steel Ø5 mm with external thread M3 and break shaft, length 4 mm. For use on machine tools. Previous part number: 21.00-S-M3
| Male Thread | M3 |
| Diameter (D) | 5 mm |
| Length (L) | 4 mm |
| Material | Steel |
Added to your shopping cart.
Product availability by store location
Hours