Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
  1. Home
  2. Catalogue
  3. CMM
  4. Fixtures

Fixtures

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Price:  CHF480.00
Quick Overview:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Part Number:  GB0122-0019
  • Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40
Delivery time 10-15 days
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Price:  CHF560.00
Quick Overview:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Part Number:  GB0122-0008
  • Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60
Delivery time 10-15 days
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Price:  CHF22.00
Quick Overview:  The angle block slider enables users to position elements horizontally on the base plate.
  • Part Number:  FV-ANGSLIDER
  • Thread:  M4
In Stock - Despatched 1-2 Days
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Price:  CHF1,642.00
Quick Overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Part Number:  FX-BP500/500
  • Thread:  M8
In Stock - Despatched 1-2 Days
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Price:  CHF19.00
Quick Overview: 

Standoffs with pins enable precise positioning and secure support of workpieces without restricting access to relevant measurement areas.
  • Part Number:  FV-SO/PIN
  • Thread:  M4
  • Diameter:  8 mm
  • Length:  10 mm
In Stock - Despatched 1-2 Days
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Price:  CHF52.00
Quick Overview:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Part Number:  FV-CNRBRKT
In Stock - Despatched 1-2 Days
Universal Clamp (M8)
Universal Clamp (M8)
ID: FX-CLAMP
Price:  CHF129.00
Quick Overview:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Part Number:  FX-CLAMP
  • Thread:  M8
In Stock - Despatched 1-2 Days
Vee Block Single
Vee Block Single
ID: FV-VEE
Price:  CHF32.00
Quick Overview:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Part Number:  FV-VEE
In Stock - Despatched 1-2 Days
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Price:  CHF19.00
Quick Overview:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Part Number:  FV-POST
  • Thread:  M4
In Stock - Despatched 1-2 Days
Swift-Fix - Basic Kit
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Price:  CHF475.00
Quick Overview:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Part Number:  FX-BASIC/KIT
  • Thread:  M8
  • Application:  CMM, Portable Measuring Arm
In Stock - Despatched 1-2 Days
Toggle Clamp
Toggle Clamp
ID: FX-TOG
Price:  CHF139.00
Quick Overview:  Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
  • Part Number:  FX-TOG
  • Thread:  M8
In Stock - Despatched 1-2 Days
SWIFT-CHECK
SWIFT-CHECK
ID: GB0096-2001
Price:  CHF5,756.00
Quick Overview:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Part Number:  GB0096-2001
  • CMM Compatibility:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Software Compatibility:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Time:  Length Check: 20 Minutes, Ring Check: 5 Minutes, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
  • Dimensions:  Length Bar Length = 300 mm, Ring Gauge Diameter = 25 mm, Sphere Diameter = 25 mm
Delivery > 25 days
SWIFT-SET
SWIFT-SET
ID: GB0122-1000
Price:  zł36,765.00
Quick Overview: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.
  • Part Number:  GB0122-1000
  • Compatibility:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Delivery > 25 days
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
ID: FC-125AL6
Price:  zł5,667.00
Quick Overview: 

6-jaw chuck with flange made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Part Number:  FC-125AL6
  • Outside Diameter Chuck (D1):  125
  • Clamping Range:  5 - 156
  • Fixing:  M4 / M8
In Stock - Despatched 1-2 Days
3-Jaw Chuck with Flange (Aluminium / Ø 240 mm)
3-Jaw Chuck with Flange (Aluminium / Ø 240 mm)
ID: FC-240AL3
Price:  zł15,975.00
Quick Overview: 

3-jaw chuck with flange made of aluminium with an outside diameter of 240 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Part Number:  FC-240AL3
  • Outside Diameter Chuck (D1):  240
  • Clamping Range Outside (A):  1 - 288
  • Clamping Range Inside (I):  35 - 295
  • Fixing:  M8
In Stock - Despatched 1-2 Days
3-Jaw Chuck with Flange (Stainless Steel / Ø 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / Ø 160 mm)
ID: FC-160SS3
Price:  zł6,730.00
Quick Overview: 

3-jaw chuck with flange made of stainless steel with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Part Number:  FC-160SS3
  • Outside Diameter Chuck (D1):  160
  • Clamping Range Outside (A):  1 - 150
  • Clamping Range Inside (I):  34 - 174
  • Fixing:  M4 / M8
In Stock - Despatched 1-2 Days
3-Jaw Chuck without Flange (Stainless Steel / Ø 70 mm)
3-Jaw Chuck without Flange (Stainless Steel / Ø 70 mm)
ID: FC-70SS3-NF
Price:  zł3,999.00
Quick Overview: 

3-jaw chuck made of stainless steel with an outside diameter of 70 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Part Number:  FC-70SS3-NF
  • Outside Diameter Chuck (D1):  70
  • Clamping Range Outside (A):  1 - 71
  • Clamping Range Inside (I):  18 - 66
  • Fixing (G):  M3
Delivery time 10-15 days
3-Jaw Chuck without Flange (Stainless Steel / Ø 160 mm)
3-Jaw Chuck without Flange (Stainless Steel / Ø 160 mm)
ID: FC-160SS3-NF
Price:  zł6,106.00
Quick Overview: 

3-jaw chuck made of stainless steel with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Part Number:  FC-160SS3-NF
  • Outside Diameter Chuck (D1):  160
  • Clamping Range Outside (A):  1 - 150
  • Clamping Range Inside (I):  34 - 174
  • Fixing (G):  M6
Delivery time 10-15 days
6-Jaw Chuck without Flange (Aluminium / Ø 125 mm)
6-Jaw Chuck without Flange (Aluminium / Ø 125 mm)
ID: FC-125AL6-NF
Price:  zł4,902.00
Quick Overview: 

6-jaw chuck made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Part Number:  FC-125AL6-NF
  • Outside Diameter Chuck (D1):  125
  • Clamping Range:  5 - 156
  • Fixing (G):  M5
Delivery time 10-15 days
6-Jaw Chuck without Flange (Aluminium / Ø 160 mm)
6-Jaw Chuck without Flange (Aluminium / Ø 160 mm)
ID: FC-160AL6-NF
Price:  zł6,407.00
Quick Overview: 

6-jaw chuck made of aluminium with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Part Number:  FC-160AL6-NF
  • Outside Diameter Chuck (D1):  160
  • Clamping Range:  5 - 196
  • Fixing (G):  M6
Delivery time 10-15 days