Hexagons COVID-19 Support & Response | Official Statement
Select your country or region
- Austria
- Bosnia
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Lithuana
- Luxembourg
- Latvia
- Netherlands
- Norway
- Poland
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
- Serbia
- Switzerland
- United Kingdom
Kinematic Base for Fixture Plate 500x500mm
ID: KB-400__400
755,00 £
In Stock - Despatched 1-2 Days
The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
| Plate Compatibility |
KPP-500/500 KPT-500/500 |
Kinematic Support Kit
ID: FX-KINKIT
228,00 £
In Stock - Despatched 1-2 Days
The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
Pillar Base Plate
ID: FX-PR30PLATE
43,00 £
In Stock - Despatched 1-2 Days
The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
| Size | 130 x 30 mm |
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
239,00 £
In Stock - Despatched 1-2 Days
Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
| Thread | M4 |
Pillar 30x30x50mm
ID: FX-PR30__50
33,00 £
In Stock - Despatched 1-2 Days
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
| Size | 30 x 30 x 50 mm |
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
1 652,00 £
In Stock - Despatched 1-2 Days
This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
| Thread | M8 |
Pillar 30x30x200mm
ID: FX-PR30__200
41,00 £
In Stock - Despatched 1-2 Days
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
| Size | 30 x 30 x 200 mm |
Hinge Pivot With Handle
ID: FX-PR30HINGE
43,00 £
In Stock - Despatched 1-2 Days
The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Universal Kinematic Fixture Base
ID: KB-UNIVL
535,00 £
In Stock - Despatched 1-2 Days
The universal kinematic base remains on the machine and ensures accurate, highly repeatable placement of kinematic fixture plates without manual alignment. It can be used with any size of kinematic fixture plates.
| Plate Compatibility |
KPP-300/300 KPT-300/300 KPP-400/400 KPT-400/400 KPP-500/500 KPT-500/500 |
Universal Clamp (M8)
ID: FX-CLAMP
98,00 £
In Stock - Despatched 1-2 Days
The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
| Thread | M8 |
Vee Block Single
ID: FV-VEE
27,00 £
In Stock - Despatched 1-2 Days
The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
Kinematic Support Kit Plus
ID: FX-KINKITPLUS
239,00 £
In Stock - Despatched 1-2 Days
The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
| Plate Compatibility | KB-UNIVL |
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
ID: FC-160SS3-NF
1 299,00 £
Delivery time 10-15 days
Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
| Outside Diameter Chuck (D1) | 160 mm |
| Clamping Range Outside (A) | 1 - 150 mm |
| Clamping Range Inside (I) | 34 - 174 mm |
| Material | Stainless Steel |
| Fixing (G) | M6 |
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
1 108,00 £
In Stock - Despatched 1-2 Days
Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
| Outside Diameter Chuck (D1) | 125 mm |
| Clamping Range Outside (A) | 1 - 126 mm |
| Clamping Range Inside (I) | 32 - 122 mm |
| Material | Stainless Steel |
| Fixing | M4 / M8 |
HR-ME3 3-Port Module for HR-MP Rack
ID: 03939486
774,00 £
In Stock - Despatched 1-2 Days
3-port module compatible with HP-TM, HP-TMe and HP-THD probe modules
| Port Quantity | 3 |
| Related Probe |
HP-TM HP-TMe HP-THD |
Kinematic Fixture Plate 500x500 mm (M8)
ID: KPT-500__500
1 614,00 £
In Stock - Despatched 1-2 Days
The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
| Plate Compatibility |
KB-400/400 KB-UNIVL |
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
821,00 £
In Stock - Despatched 1-2 Days
The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
| Thread | M4 |
| Application | Multisensor CMM |
Slider Block (M8)
ID: FX-SLIDER
22,00 £
In Stock - Despatched 1-2 Days
A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
| Thread | M8 |
Spring Clamp (M4)
ID: FV-SPRING
42,00 £
In Stock - Despatched 1-2 Days
Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
| Thread | M4 |
HP-THD-SF Probe Module (Standard Force)
ID: 03939603
563,00 £
In Stock - Despatched 1-2 Days
Standard force probe module of the compact 6-way touch-trigger probe HP-THD
| Related Probe | HP-THD |
| Probing Directions | ± X, ± Y, ± Z |
| Probe Mounting | M8 |
| Stylus Mounting | M2 |
| Max. Stylus Length | 30 mm |
Added to your shopping cart.
Product availability by store location
Hours