Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
  1. Home
  2. Catalogue
  3. CMM
  4. Fixtures

Fixtures

Cap Screw Set M8 (L = 16 mm)
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
Price:  15,00 £
Quick Overview:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Thread:  M8
In Stock - Despatched 1-2 Days
Flexible Vice
Flexible Vice
ID: FV-SLIDE
Price:  223,00 £
Quick Overview:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Thread:  M4
In Stock - Despatched 1-2 Days
Resting Cone (M8)
Resting Cone (M8)
ID: FX-CONE
Price:  17,00 £
Quick Overview:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Thread:  M8
In Stock - Despatched 1-2 Days
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Price:  227,00 £
Quick Overview:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Thread:  M4
In Stock - Despatched 1-2 Days
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Price:  16,00 £
Quick Overview:  The angle block slider enables users to position elements horizontally on the base plate.
  • Thread:  M4
In Stock - Despatched 1-2 Days
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Price:  1 253,00 £
Quick Overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Thread:  M8
In Stock - Despatched 1-2 Days
Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Price:  1 570,00 £
Quick Overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Thread:  M8
In Stock - Despatched 1-2 Days
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Price:  11,00 £
Quick Overview:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Length:  10 mm
  • Diameter:  8 mm
In Stock - Despatched 1-2 Days
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Price:  42,00 £
Quick Overview:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
In Stock - Despatched 1-2 Days
Universal Clamp (M8)
Universal Clamp (M8)
ID: FX-CLAMP
Price:  92,00 £
Quick Overview:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Thread:  M8
In Stock - Despatched 1-2 Days
Vee Block Single
Vee Block Single
ID: FV-VEE
Price:  25,00 £
Quick Overview:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
In Stock - Despatched 1-2 Days
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Price:  13,00 £
Quick Overview:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Thread:  M4
In Stock - Despatched 1-2 Days
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Price:  291,00 £
Quick Overview:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Thread:  M4
In Stock - Despatched 1-2 Days
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Price:  38,00 £
Quick Overview:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Thread:  M4
In Stock - Despatched 1-2 Days
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Price:  1 000,00 £
Quick Overview:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  125mm
  • Clamping Range Outside (A):  1 - 126mm
  • Clamping Range Inside (I):  32 - 122mm
  • Material:  Stainless Steel
  • Fixing:  M4 / M8
In Stock - Despatched 1-2 Days
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
ID: FC-160AL6
Price:  1 233,00 £
Quick Overview:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  160mm
  • Clamping Range:  5 - 196mm
  • Material:  Aluminium
  • Fixing:  M4 / M8
In Stock - Despatched 1-2 Days
Kinematic Fixture Plate 500x500mm (Plain)
Kinematic Fixture Plate 500x500mm (Plain)
ID: KPP-500__500
Price:  653,00 £
Quick Overview:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Plate Compatibility:  KB-400/400, KB-UNIVL
In Stock - Despatched 1-2 Days
Kinematic Fixture Plate 400x400 mm (M8)
Kinematic Fixture Plate 400x400 mm (M8)
ID: KPT-400__400
Price:  1 134,00 £
Quick Overview:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Plate Compatibility:  KB-300/300, KB-UNIVL
In Stock - Despatched 1-2 Days
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Price:  1 000,00 £
Quick Overview:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  125mm
  • Clamping Range:  5 - 156mm
  • Material:  Aluminium
  • Fixing:  M4 / M8
In Stock - Despatched 1-2 Days
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Price:  28,00 £
Quick Overview:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Length:  10 mm
  • Diameter:  8 mm
In Stock - Despatched 1-2 Days