Hexagons COVID-19 Support & Response | Official Statement
Select your country or region
- Austria
- Bosnia
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Lithuana
- Luxembourg
- Latvia
- Netherlands
- Norway
- Poland
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
- Serbia
- Switzerland
- United Kingdom
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
420,00 £
Delivery time 10-15 days
Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
| Compatibility | HP-S-X3 Stylus Clampings |
| Diameter | 40 mm |
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
487,00 £
Delivery time 10-15 days
Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
| Compatibility | HP-S-X1 Stylus Clampings |
| Diameter | 60 mm |
Kinematic Support Kit Plus
ID: FX-KINKITPLUS
239,00 £
In Stock - Despatched 1-2 Days
The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
| Plate Compatibility | KB-UNIVL |
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
1 108,00 £
In Stock - Despatched 1-2 Days
Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
| Outside Diameter Chuck (D1) | 125 mm |
| Clamping Range Outside (A) | 1 - 126 mm |
| Clamping Range Inside (I) | 32 - 122 mm |
| Material | Stainless Steel |
| Fixing | M4 / M8 |
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
ID: FC-160SS3-NF
1 299,00 £
Delivery time 10-15 days
Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
| Outside Diameter Chuck (D1) | 160 mm |
| Clamping Range Outside (A) | 1 - 150 mm |
| Clamping Range Inside (I) | 34 - 174 mm |
| Material | Stainless Steel |
| Fixing (G) | M6 |
Spring Clamp (M8)
ID: FX-SPRING
46,00 £
In Stock - Despatched 1-2 Days
Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
| Thread | Without Thread |
Tension Clamp (L = 66 mm)
ID: FX-CTMED
28,00 £
In Stock - Despatched 1-2 Days
Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
| Thread | Without Thread |
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
39,00 £
In Stock - Despatched 1-2 Days
The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
| Length | 20 mm |
| Diameter | 16 mm |
Kinematic Fixture Plate 300x300 mm (M8)
ID: KPT-300__300
707,00 £
In Stock - Despatched 1-2 Days
The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
| Plate Compatibility |
KB-250/250 KB-UNIVL |
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
917,00 £
In Stock - Despatched 1-2 Days
This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
| Thread | M8 |
Swift-Fix Tool Kit
ID: FX-TOOLS
23,00 £
In Stock - Despatched 1-2 Days
The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
16,00 £
In Stock - Despatched 1-2 Days
Cap screws are used to mount Swift-Fix components on the base plate.
| Thread | M8 |
Cap Screw Set M8 (L = 20 mm)
ID: FX-CAPM8__20
16,00 £
In Stock - Despatched 1-2 Days
Cap screws are used to mount Swift-Fix components on the base plate.
| Thread | M8 |
Kinematic Base for Fixture Plate 500x500mm
ID: KB-400__400
755,00 £
In Stock - Despatched 1-2 Days
The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
| Plate Compatibility |
KPP-500/500 KPT-500/500 |
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
239,00 £
In Stock - Despatched 1-2 Days
Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
| Thread | M4 |
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
1 318,00 £
In Stock - Despatched 1-2 Days
This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
| Thread | M8 |
Pillar 30x30x50mm
ID: FX-PR30__50
33,00 £
In Stock - Despatched 1-2 Days
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
| Size | 30 x 30 x 50 mm |
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
1 652,00 £
In Stock - Despatched 1-2 Days
This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
| Thread | M8 |
Kinematic Fixture Plate 300x300mm (Plain)
ID: KPP-300__300
449,00 £
In Stock - Despatched 1-2 Days
The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
| Plate Compatibility |
KB-250/250 KB-UNIVL |
Vee Block Twin
ID: FV-VEETWIN
39,00 £
In Stock - Despatched 1-2 Days
The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Added to your shopping cart.
Product availability by store location
Hours