Skip to content Skip to navigation menu
Hexagons COVID-19 Support & Response | Official Statement

Select your country or region

Map Europe

Map Americas

  • 3
  • 4(current)
  • 5
102 Product(s) found
  • Standoff (D = 8 mm / L = 25 mm) Standoff (D = 8 mm / L = 25 mm) ID: FV-SO8__25
    9,00 €

    In Stock - Despatched 1-2 Days

    Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Length 25 mm 
    Diameter 8 mm 
  • Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern ID: FV-BP200__200P
    239,00 €

    In Stock - Despatched 1-2 Days

    Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
    Thread M4 
  • Standoff (D = 20 mm / L = 100 mm) Standoff (D = 20 mm / L = 100 mm) ID: FX-SO20__100
    22,00 €

    In Stock - Despatched 1-2 Days

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Length 100 mm 
    Diameter 20 mm 
  • Pillar Kit Pillar Kit ID: FX-PILLAR__KIT
    882,00 €

    In Stock - Despatched 1-2 Days

    The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
  • Fixture Baseplate 400x600x12mm (M8) Fixture Baseplate 400x600x12mm (M8) ID: FX-BP400__600
    1 565,00 €

    In Stock - Despatched 1-2 Days

    This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
    Thread M8 
  • Baseplate Retaining Screw (M8) Baseplate Retaining Screw (M8) ID: FX-BPRTR
    5,00 €

    In Stock - Despatched 1-2 Days

    Retaining screws secure base plates on the machine table and make it simple to mount multiple plates next to each other.
    Thread M8 
  • Standoff (D = 20 mm / L = 30 mm) Standoff (D = 20 mm / L = 30 mm) ID: FX-SO20__30
    14,00 €

    In Stock - Despatched 1-2 Days

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Length 30 mm 
    Diameter 20 mm 
  • Swift-Fix Vision - Full Kit Swift-Fix Vision - Full Kit ID: FV-FULLKIT
    1 911,00 €

    In Stock - Despatched 1-2 Days

    With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
    Thread M4 
    Application Multisensor CMM 
  • Standoff Magnet  (D = 16 mm / L = 20 mm) Standoff Magnet (D = 16 mm / L = 20 mm) ID: FX-SO__MAG
    18,00 €

    In Stock - Despatched 1-2 Days

    The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
    Length 20 mm 
    Diameter 16 mm 
  • Standoff (D = 16 mm / L = 30 mm) Standoff (D = 16 mm / L = 30 mm) ID: FX-SO16__30
    14,00 €

    In Stock - Despatched 1-2 Days

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Length 30 mm 
    Diameter 16 mm 
  • Standoff Pin M8 (D= 16 mm/L= 20 mm) Standoff Pin M8 (D= 16 mm/L= 20 mm) ID: FX-SO__PIN
    18,00 €

    In Stock - Despatched 1-2 Days

    The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
    Length 20 mm 
    Diameter 16 mm 
  • Pillar 30x30x200mm Pillar 30x30x200mm ID: FX-PR30__200
    40,00 €

    In Stock - Despatched 1-2 Days

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
    Size 30 x 30 x 200 mm 
  • Standoff (D = 16 mm / L = 50 mm) Standoff (D = 16 mm / L = 50 mm) ID: FX-SO16__50
    15,00 €

    In Stock - Despatched 1-2 Days

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Length 50 mm 
    Diameter 16 mm 
  • Vee Block Single Vee Block Single ID: FV-VEE
    27,00 €

    In Stock - Despatched 1-2 Days

    The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Swift-Fix - Basic Kit Swift-Fix - Basic Kit ID: FX-BASIC__KIT
    410,00 €

    In Stock - Despatched 1-2 Days

    The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
    Thread M8 
    Application CMM 
    Portable Measuring Arm 
  • Standoff (D = 20 mm / L = 50 mm) Standoff (D = 20 mm / L = 50 mm) ID: FX-SO20__50
    15,00 €

    In Stock - Despatched 1-2 Days

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Length 50 mm 
    Diameter 20 mm 
  • Spring Pusher Standoff Clamp (D=20mm / L=20mm) Spring Pusher Standoff Clamp (D=20mm / L=20mm) ID: FX-LATLGE
    54,00 €

    In Stock - Despatched 1-2 Days

    The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
    Length 20 mm 
    Diameter 20 mm 
  • Articulated Fixture Arm (M8) Articulated Fixture Arm (M8) ID: FX-ARM
    75,00 €

    In Stock - Despatched 1-2 Days

    The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
    Thread M8 
  • Slider Block (M4) Slider Block (M4) ID: FV-SLIDER
    13,00 €

    In Stock - Despatched 1-2 Days

    A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
    Thread M4 
  • Kinematic Support Kit Plus Kinematic Support Kit Plus ID: FX-KINKITPLUS
    242,00 €

    In Stock - Despatched 1-2 Days

    The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
    Plate Compatibility KB-UNIVL 
    • 3
    • 4(current)
    • 5