Hexagons COVID-19 Support & Response | Official Statement
Select your country or region
- Austria
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Lithuana
- Luxembourg
- Latvia
- Netherlands
- Norway
- Poland
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- United Kingdom
€65.00
In Stock - Despatched 1-2 Days
Straight stylus with break shaft connection, ruby ball Ø6 mm, stainless steel stem, length 100 mm. For use on machine tools. Previous part number: 91.00-T103/6
Thread | Break Shaft Connection |
Tip Material | Ruby |
Tip Diameter (D) | 6 mm |
Length (L) | 100 mm |
Stem Material | Stainless Steel |
€57.00
In Stock - Despatched 1-2 Days
Straight stylus with M2 thread, ruby ball Ø3 mm, tungsten carbide stem, length 50 mm. For use on machine tools. Previous part number: 91.00-T51.5/3-HM-M2
Thread | M2 |
Tip Material | Ruby |
Tip Diameter (D) | 3 mm |
Length (L) | 50 mm |
Stem Material | Tungsten Carbide |
€49.00
In Stock - Despatched 1-2 Days
Straight stylus with M2 thread, ruby ball Ø3 mm, tungsten carbide stem, length 30 mm. For use on machine tools. Previous part number: 91.00-T31.5/3-HM-M2
Thread | M2 |
Tip Material | Ruby |
Tip Diameter (D) | 3 mm |
Length (L) | 30 mm |
Stem Material | Tungsten Carbide |
€179.00
In Stock - Despatched 1-2 Days
Stylus with break shaft connection, square stylus tip made of tungsten carbide 10x10 mm, stainless steel stem, length 76 mm. For tool measurement on turning machines. Previous part number: 21.00-WM76
Thread | Break Shaft Connection |
Tip Material | Tungsten Carbide |
Tip Size | 10 x 10 x 5 mm |
Length (L) | 76 mm |
Stem Material | Stainless Steel |
€298.00
In Stock - Despatched 1-2 Days
Calibration sphere (Ø30 mm) made of tungsten carbide with internal M8 thread for use on machine tools.
Material | Tungsten Carbide |
Sphere Diameter | 30 mm |
Internal Thread | M8 |
€310.00
In Stock - Despatched 1-2 Days
Calibration sphere (Ø25 mm) made of tungsten carbide with external M12 thread for use on machine tools.
Material | Tungsten Carbide |
Sphere Diameter | 25 mm |
External Thread | M12 |
€98.00
In Stock - Despatched 1-2 Days
Calibration pin (Ø6 mm) made of hardened stainless steel for calibration of laser tool setters on machine tools. Length 50 mm.
Material | Stainless Steel, hardened |
Diameter | 6 mm |
Length | 50 mm |
Application | Laser Tool Setter Calibration |
€173.00
In Stock - Despatched 1-2 Days
Stylus with break shaft connection, square stylus tip made of tungsten carbide 10x10 mm, stainless steel stem, length 46 mm. For tool measurement on turning machines. Previous part number: 21.00-WM46
Thread | Break Shaft Connection |
Tip Material | Tungsten Carbide |
Tip Size | 10 x 10 x 5 mm |
Length (L) | 46 mm |
Stem Material | Stainless Steel |
€53.00
In Stock - Despatched 1-2 Days
Tool kit for installation and maintenance of Tool Setter TS35.20. Tool box contents see description.
Compatibility | TS35.20 |
€2.00
In Stock - Despatched 1-2 Days
Mounting pin made of steel Ø6 mm, length 80 mm. Used for mounting calibration sets on the machine tool table.
Material | Steel |
Diameter | 6 mm |
Length | 80 mm |
€83.00
In Stock - Despatched 1-2 Days
5-way stylus center made of stainless steel, with external thread M3 for holding up to 5x M3 styli, length 13 mm. For use on machine tools. Previous part number: 21.00-TK-M3
Male Thread | M3 |
Female Thread (C) | 5 x M3 |
Diameter (D) | 10 mm |
Length (L) | 13 mm |
€55.00
In Stock - Despatched 1-2 Days
Straight stylus with M3 thread, ruby ball Ø5 mm, tungsten carbide stem, length 30 mm. For use on machine tools. Previous part number: 21.00-T30/5-HM-M3
Thread | M3 |
Tip Material | Ruby |
Tip Diameter (D) | 5 mm |
Length (L) | 30 mm |
Stem Material | Tungsten Carbide |
€55.00
In Stock - Despatched 1-2 Days
Straight stylus with M4 thread, ruby ball Ø1 mm, tungsten carbide stem, length 20 mm. For use on machine tools. Previous part number: 91.00-T20/1-HM-M4-D7
Thread | M4 |
Tip Material | Ruby |
Tip Diameter (D) | 1 mm |
Length (L) | 20 mm |
Stem Material | Tungsten Carbide |
€67.00
In Stock - Despatched 1-2 Days
Straight stylus with M4 thread, ruby ball Ø5 mm, stainless steel stem, length 30 mm. For use on machine tools. Previous part number: 91.00-T32.5/5-ST-M4
Thread | M4 |
Tip Material | Ruby |
Tip Diameter (D) | 5 mm |
Length (L) | 30 mm |
Stem Material | Stainless Steel |
€18.00
In Stock - Despatched 1-2 Days
Stylus adapter made of steel Ø5 mm with external thread M3 and break shaft, length 4 mm. For use on machine tools. Previous part number: 21.00-S-M3
Male Thread | M3 |
Diameter (D) | 5 mm |
Length (L) | 4 mm |
Material | Steel |
€260.00
In Stock - Despatched 1-2 Days
Ball disc stylus made of stainless steel Ø50 mm, with external/internal thread M4, length 10 mm. For use on machine tools. Previous part number: 91.00-TS50-ST-M4
Thread | M4 |
Tip Material | Stainless Steel |
Disc Diameter (D) | 50 mm |
Length (L) | 10 mm |
€38.00
In Stock - Despatched 1-2 Days
Straight stylus with M3 thread, ruby ball Ø3 mm, tungsten carbide stem, length 30 mm. For use on machine tools. Previous part number: 21.00-T30/3-HM-M3
Thread | M3 |
Tip Material | Ruby |
Tip Diameter (D) | 3 mm |
Length (L) | 30 mm |
Stem Material | Tungsten Carbide |
€5.00
In Stock - Despatched 1-2 Days
T-Nut with internal thread M10. For mounting measuring systems and accessories on machine tools.
Material | Tempered Steel |
Internal Thread | M10 |
T-Slot Nominal Size | 12 mm |
€105.00
In Stock - Despatched 1-2 Days
Case for storage and transport of Hexagon measuring systems for machine tools.
Size | 390 x 310 x 147 mm |
Material | Plastics |
€50.00
In Stock - Despatched 1-2 Days
Straight stylus with M4 thread, ruby ball Ø5 mm, stainless steel stem, length 17.5 mm. For use on machine tools. Previous part number: 91.00-T20/5-ST-M4-D7
Thread | M4 |
Tip Material | Ruby |
Tip Diameter (D) | 5 mm |
Length (L) | 17.5 mm |
Stem Material | Stainless Steel |
Added to your shopping cart.
Product availability by store location
Hours