Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
Articulated Fixture Arm (M8)
ID: FX-ARM
Price:  €95.00
Quick Overview:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Thread:  M8
In Stock - Despatched 1-2 Days
Slider Block (M4)
ID: FV-SLIDER
Price:  €17.00
Quick Overview:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Thread:  M4
In Stock - Despatched 1-2 Days
Standoff Magnet  (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Price:  €16.00
Quick Overview:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Length:  10 mm
  • Diameter:  8 mm
In Stock - Despatched 1-2 Days
Spring Clamp (M4)
ID: FV-SPRING
Price:  €50.00
Quick Overview:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Thread:  M4
In Stock - Despatched 1-2 Days
Resting Cone (M4)
ID: FV-CONE
Price:  €15.00
Quick Overview:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Thread:  M4
In Stock - Despatched 1-2 Days
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Price:  €1,322.00
Quick Overview:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  125mm
  • Clamping Range Outside (A):  1 - 126mm
  • Clamping Range Inside (I):  32 - 122mm
  • Fixing:  M4 / M8
In Stock - Despatched 1-2 Days
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
ID: FC-240AL3
Price:  €3,762.00
Quick Overview:  Three-jaw chuck made from aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  240mm
  • Clamping Range Outside (A):  1 - 288mm
  • Clamping Range Inside (I):  35 - 295mm
  • Fixing:  M8
In Stock - Despatched 1-2 Days
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Price:  €1,630.00
Quick Overview:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  160mm
  • Clamping Range Outside (A):  1 - 150mm
  • Clamping Range Inside (I):  34 - 174mm
  • Fixing:  M4 / M8
In Stock - Despatched 1-2 Days
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Price:  €1,026.00
Quick Overview:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  70mm
  • Clamping Range Outside (A):  1 - 71mm
  • Clamping Range Inside (I):  18 - 66mm
  • Fixing:  M4 / M8
In Stock - Despatched 1-2 Days
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
ID: FC-160AL6-NF
Price:  €1,630.00
Quick Overview:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  160mm
  • Clamping Range:  5 - 196mm
  • Fixing (G):  M6
Delivery time 10-15 days
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
ID: FC-125SS3-NF
Price:  €1,243.00
Quick Overview:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  125mm
  • Clamping Range Outside (A):  1 - 126mm
  • Clamping Range Inside (I):  32 - 122mm
  • Fixing (G):  M5
Delivery time 10-15 days
Kinematic Fixture Plate 400x400 mm (M8)
ID: KPT-400__400
Price:  €1,500.00
Quick Overview:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Plate Compatibility :  KB-300/300, KB-UNIVL
In Stock - Despatched 1-2 Days
Kinematic Fixture Plate 500x500 mm (M8)
ID: KPT-500__500
Price:  €2,029.00
Quick Overview:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Plate Compatibility :  KB-400/400, KB-UNIVL
In Stock - Despatched 1-2 Days
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Price:  €1,015.00
Quick Overview:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  70mm
  • Clamping Range Outside (A):  1 - 71mm
  • Clamping Range Inside (I):  18 - 66mm
  • Fixing (G):  M3
Delivery time 10-15 days
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
ID: FC-160SS3-NF
Price:  €1,550.00
Quick Overview:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  160mm
  • Clamping Range Outside (A):  1 - 150mm
  • Clamping Range Inside (I):  34 - 174mm
  • Fixing (G):  M6
Delivery time 10-15 days
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Price:  €1,243.00
Quick Overview:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  125mm
  • Clamping Range:  5 - 156mm
  • Fixing (G):  M5
Delivery time 10-15 days
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Price:  €1,322.00
Quick Overview:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Outside Diameter Chuck (D1):  125mm
  • Clamping Range:  5 - 156mm
  • Fixing:  M4 / M8
In Stock - Despatched 1-2 Days
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Price:  €35.00
Quick Overview:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Thread:  Without Thread
In Stock - Despatched 1-2 Days
Spring Clamp (M8)
ID: FX-SPRING
Price:  €55.00
Quick Overview:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Thread:  Without Thread
In Stock - Despatched 1-2 Days
Thumb Screw M8
ID: FX-THUMB
Price:  €10.00
Quick Overview:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Thread:  M8
In Stock - Despatched 1-2 Days