text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
  1. Accueil
  2. Katalog
  3. SMS
  4. Upínání

Upínání

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SKU: GB0122-0019
Prix:  480,00 CHF
Vue d'ensemble sommaire:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Objednávací kód:  GB0122-0019
  • Kompatibilita:  HP-S-X3 Stylus Clampings
  • Průměr:  40
Available
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SKU: GB0122-0008
Prix:  560,00 CHF
Vue d'ensemble sommaire:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Objednávací kód:  GB0122-0008
  • Kompatibilita:  HP-S-X1 Stylus Clampings
  • Průměr:  60
Available
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
SKU: FC-125AL6
Prix:  1 318,00 CHF
Vue d'ensemble sommaire: 

6-jaw chuck with flange made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Objednávací kód:  FC-125AL6
  • Vnější průměr sklíčidla (D1):  125
  • Upínací rozsah:  5 - 156
  • Materiál:  Hliník
  • Upevnění:  M4 / M8
En stock
6-Jaw Chuck without Flange (Aluminium / Ø 125 mm)
6-Jaw Chuck without Flange (Aluminium / Ø 125 mm)
SKU: FC-125AL6-NF
Prix:  1 140,00 CHF
Vue d'ensemble sommaire: 

6-jaw chuck made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Objednávací kód:  FC-125AL6-NF
  • Vnější průměr sklíčidla (D1):  125
  • Upínací rozsah:  5 - 156
  • Materiál:  Hliník
  • Upevnění (G):  M5
Available
6-Jaw Chuck without Flange (Aluminium / Ø 160 mm)
6-Jaw Chuck without Flange (Aluminium / Ø 160 mm)
SKU: FC-160AL6-NF
Prix:  1 490,00 CHF
Vue d'ensemble sommaire: 

6-jaw chuck made of aluminium with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Objednávací kód:  FC-160AL6-NF
  • Vnější průměr sklíčidla (D1):  160
  • Upínací rozsah:  5 - 196
  • Materiál:  Hliník
  • Upevnění (G):  M6
Available
3-Jaw Chuck without Flange (Stainless Steel / Ø 125 mm)
3-Jaw Chuck without Flange (Stainless Steel / Ø 125 mm)
SKU: FC-125SS3-NF
Prix:  1 140,00 CHF
Vue d'ensemble sommaire: 

3-jaw chuck made of stainless steel with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Objednávací kód:  FC-125SS3-NF
  • Vnější průměr sklíčidla (D1):  125
  • Vnější upínací rozsah (A):  1 - 126
  • Vnitřní upínací rozsah (I):  32 - 122
  • Materiál:  Nerezová ocel
Available
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
SKU: FX-BP300__400
Prix:  1 004,00 CHF
Vue d'ensemble sommaire: 

This fixture base plate can be connected side-by-side with other base plates of the same size. M8 threaded holes and alphanumeric identification enable quick and easy fixture setup and repeatable fixture assembly.
  • Objednávací kód:  FX-BP300/400
  • Závit:  M8
En stock
Vee Locator
Vee Locator
SKU: FV-FEMALE
Prix:  33,00 CHF
Vue d'ensemble sommaire:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Objednávací kód:  FV-FEMALE
En stock
Vee Block Twin
Vee Block Twin
SKU: FV-VEETWIN
Prix:  47,00 CHF
Vue d'ensemble sommaire:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Objednávací kód:  FV-VEETWIN
En stock
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
SKU: FV-GUIDE480
Prix:  279,00 CHF
Vue d'ensemble sommaire: 

The base plate guide rail provides precise alignment and positioning of acrylic base plates at any side of the measuring volume of a multisensor CMM.
  • Objednávací kód:  FV-GUIDE480
  • Kompatibilita desek :  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
En stock
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
SKU: FV-SO8__20
Prix:  10,00 CHF
Vue d'ensemble sommaire:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Objednávací kód:  FV-SO8/20
  • Závit:  M4
  • Průměr:  8 mm
  • Délka:  20 mm
En stock
Cone Adjustable (M4)
Cone Adjustable (M4)
SKU: FV-CONEADJ
Prix:  22,00 CHF
Vue d'ensemble sommaire:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Objednávací kód:  FV-CONEADJ
  • Závit:  M4
En stock
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
SKU: FX-BP300__300
Prix:  819,00 CHF
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Objednávací kód:  FX-BP300/300
  • Závit:  M8
En stock
Spring Pusher Standoff Clamp (D = 8 mm / L = 10 mm)
Spring Pusher Standoff Clamp (D = 8 mm / L = 10 mm)
SKU: FV-LATSML
Prix:  39,00 CHF
Vue d'ensemble sommaire: 

The spring-loaded standoff securely holds delicate components in position using lateral clamping force.
  • Objednávací kód:  FV-LATSML
  • Závit:  M4
  • Průměr:  8 mm
  • Délka:  10 mm
En stock
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
SKU: FV-SO8__25
Prix:  10,00 CHF
Vue d'ensemble sommaire:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Objednávací kód:  FV-SO8/25
  • Závit:  M4
  • Průměr:  8 mm
  • Délka:  25 mm
En stock
Standoff Support (M4)
Standoff Support (M4)
SKU: FV-SOSUP
Prix:  18,00 CHF
Vue d'ensemble sommaire:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Objednávací kód:  FV-SOSUP
  • Závit:  M4
  • Průměr:  8 mm
  • Délka:  6 mm
En stock
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
SKU: FX-BP400__400
Prix:  1 145,00 CHF
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Objednávací kód:  FX-BP400/400
  • Závit:  M8
En stock
Acryl Baseplate 200x200x10mm(M4) - Perimeter Pattern
Acryl Baseplate 200x200x10mm(M4) - Perimeter Pattern
SKU: FV-BP200__200P
Prix:  594,00 CHF
Vue d'ensemble sommaire:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Objednávací kód:  FV-BP200/200P
  • Závit:  M4
En stock
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
SKU: FX-BP400__600
Prix:  1 955,00 CHF
Vue d'ensemble sommaire:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Objednávací kód:  FX-BP400/600
  • Závit:  M8
En stock
Centering Pin
Centering Pin
SKU: FV-MALE
Prix:  24,00 CHF
Vue d'ensemble sommaire:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Objednávací kód:  FV-MALE
  • Závit:  M4
En stock