text.skipToContent text.skipToNavigation
Hexagons COVID-19 Support & Response | Official Statement

Select your country or region

  1. Domů
  2. Katalog
  3. SMS
Seřazeno podle:
  • 1(current)
  • 2
  • 3
159 Nalezené produkty
  • HA-M-100 Probe Extension M8 (L = 100 mm) HA-M-100 Probe Extension M8 (L = 100 mm) ID: 03969066
    190,00 €

    Skladem - Odeslání do 1-2 dnů

    M8/M8 extension made of aluminium and stainless steel with a length of 100 mm.
    Připojení M8 / M8 
    Délka (L) 100 mm
    Materiál Hliník / Nerezová ocel 
  • HA-TT-50 Probe Extension TKJ (L = 50 mm) HA-TT-50 Probe Extension TKJ (L = 50 mm) ID: 03969360
    503,00 €

    Skladem - Odeslání do 1-2 dnů

    TKJ extension made of aluminium and stainless steel with a length of 50 mm.
    Připojení TKJ / TKJ 
    Délka (L) 50 mm
    Materiál Hliník / Nerezová ocel 
  • HA-TT-300C Probe Extension TKJ (L = 300 mm) HA-TT-300C Probe Extension TKJ (L = 300 mm) ID: 03969364
    1 482,00 €

    Skladem - Odeslání do 1-2 dnů

    TKJ extension made of carbon fibre and stainless steel with a length of 300 mm
    Připojení TKJ / TKJ 
    Délka (L) 300 mm
    Materiál Uhlíková vlákna / Nerezová ocel 
  • HR-X1-P-SF Stylus Changer Port HR-X1-P-SF Stylus Changer Port ID: M00-114-167-000
    342,00 €

    Skladem - Odeslání do 1-2 dnů

    Stylus changer port with cover for scanning sensors HP-S-X1S, HP-S-X1H and HP-S-X1C.
    Počet portů 1 
    Související zařízení HP-S-X1S 
    HP-S-X1H 
    HP-S-X1C 
  • Vee Block Twin Vee Block Twin ID: FV-VEETWIN
    38,00 €

    Skladem - Odeslání do 1-2 dnů

    The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Spring Clamp (M8) Spring Clamp (M8) ID: FX-SPRING
    46,00 €

    Skladem - Odeslání do 1-2 dnů

    Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
    Závit Without Thread 
  • Thumb Screw M8 Thumb Screw M8 ID: FX-THUMB
    9,00 €

    Skladem - Odeslání do 1-2 dnů

    With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
    Závit M8 
  • Guide Rail (L = 480 mm) Guide Rail (L = 480 mm) ID: FV-GUIDE480
    213,00 €

    Skladem - Odeslání do 1-2 dnů

    The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
    Kompatibilita desek FV-BP200/200C 
    FV-BP200/200F 
    FV-BP200/200P 
  • Standoff (D = 8 mm / L = 20 mm) Standoff (D = 8 mm / L = 20 mm) ID: FV-SO8__20
    9,00 €

    Skladem - Odeslání do 1-2 dnů

    Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Délka 20 mm 
    Průměr 8 mm 
  • Cone Adjustable (M4) Cone Adjustable (M4) ID: FV-CONEADJ
    12,00 €

    Skladem - Odeslání do 1-2 dnů

    The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
    Závit M4 
  • Standoff (D = 16 mm / L = 20 mm) Standoff (D = 16 mm / L = 20 mm) ID: FX-SO16__20
    14,00 €

    Skladem - Odeslání do 1-2 dnů

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Délka 20 mm 
    Průměr 16 mm 
  • Hinge Pivot With Handle Hinge Pivot With Handle ID: FX-PR30HINGE
    43,00 €

    Skladem - Odeslání do 1-2 dnů

    The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Tension Clamp (L = 66 mm) Tension Clamp (L = 66 mm) ID: FX-CTMED
    28,00 €

    Skladem - Odeslání do 1-2 dnů

    Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
    Závit Without Thread 
  • Fixture Baseplate 300x300x12mm (M8) Fixture Baseplate 300x300x12mm (M8) ID: FX-BP300__300
    625,00 €

    Skladem - Odeslání do 1-2 dnů

    This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
    Závit M8 
  • Standoff (D = 16 mm / L = 100 mm) Standoff (D = 16 mm / L = 100 mm) ID: FX-SO16__100
    21,00 €

    Skladem - Odeslání do 1-2 dnů

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Délka 100 mm 
    Průměr 16 mm 
  • Spring Nut (M8) Spring Nut (M8) ID: FX-M8SPRGNUT
    28,00 €

    Skladem - Odeslání do 1-2 dnů

    Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Pillar Top Plate (10 x M8) Pillar Top Plate (10 x M8) ID: FX-SUB45__120
    49,00 €

    Skladem - Odeslání do 1-2 dnů

    The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
    Velikost 120 x 45 x 12 mm 
  • Swift-Fix - Starter Kit Swift-Fix - Starter Kit ID: FX-STARTER__KIT
    987,00 €

    Skladem - Odeslání do 1-2 dnů

    The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
    Závit M8 
    Určeno pro SMS 
    Přenosná měřicí ramena 
  • Support Stop Support Stop ID: FX-SUP__STOP
    75,00 €

    Skladem - Odeslání do 1-2 dnů

    The support stop allows the user to apply a positive clamping force with variable pressure.
    Závit M8 
  • Spring Pusher Standoff Clamp (D=8mm / L=10mm) Spring Pusher Standoff Clamp (D=8mm / L=10mm) ID: FV-LATSML
    29,00 €

    Skladem - Odeslání do 1-2 dnů

    The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
    Délka 10 mm 
    Průměr 8 mm 
    • Seřazeno podle:
    • 1(current)
    • 2
    • 3