text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
SWIFT-CHECK
ID: GB0096-2001
Prijs:  5 270,00 €
Beknopt overzicht:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • CMM compatibiliteit:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Software compatibiliteit:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Times:  Length Check: 20 Minutes, Ring Check: 5 Minutes, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
  • Afmetingen:  Length Bar Length = 300 mm, Ring Gauge Diameter = 25 mm, Kogel Diameter = 25 mm
Levertijd 10-15 dagen
SWIFT-SET
ID: GB0122-1000
Prijs:  8 140,00 €
Beknopt overzicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon’s HP-S-X tactile scanning sensors.
  • Compatibiliteit:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Levertijd 10-15 dagen
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prijs:  466,00 €
Beknopt overzicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Compatibiliteit:  HP-S-X3 Stylus Clampings
  • Diameter:  40mm
Levertijd 10-15 dagen
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prijs:  540,00 €
Beknopt overzicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Compatibiliteit:  HP-S-X1 Stylus Clampings
  • Diameter:  60mm
Levertijd 10-15 dagen
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Prijs:  1 160,00 €
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  125mm
  • Klembereik buitenzijde (A):  1 - 126mm
  • Klembereik binnenzijde (I):  32 - 122mm
  • Materiaal:  Roestvast staal
  • Bevestiging:  M4 / M8
Op voorraad - verzending 1-2 dagen
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
ID: FC-160AL6
Prijs:  1 430,00 €
Beknopt overzicht:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  160mm
  • Klembereik:  5 - 196mm
  • Materiaal:  Aluminium
  • Bevestiging:  M4 / M8
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Prijs:  1 430,00 €
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  160mm
  • Klembereik buitenzijde (A):  1 - 150mm
  • Klembereik binnenzijde (I):  34 - 174mm
  • Materiaal:  Roestvast staal
  • Bevestiging:  M4 / M8
Op voorraad - verzending 1-2 dagen
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Prijs:  1 090,00 €
Beknopt overzicht:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  125mm
  • Klembereik:  5 - 156mm
  • Materiaal:  Aluminium
  • Bevestiging (G):  M5
Levertijd 10-15 dagen
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
ID: FC-160AL6-NF
Prijs:  1 430,00 €
Beknopt overzicht:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  160mm
  • Klembereik:  5 - 196mm
  • Materiaal:  Aluminium
  • Bevestiging (G):  M6
Levertijd 10-15 dagen
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
ID: FC-125SS3-NF
Prijs:  1 090,00 €
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Buitendiameter klemvoet (D1):  125mm
  • Klembereik buitenzijde (A):  1 - 126mm
  • Klembereik binnenzijde (I):  32 - 122mm
  • Materiaal:  Roestvast staal
  • Bevestiging (G):  M5
Levertijd 10-15 dagen
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prijs:  884,00 €
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prijs:  31,00 €
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Schroefdraad:  Without Thread
Op voorraad - verzending 1-2 dagen
Vee Locator
ID: FV-FEMALE
Prijs:  25,00 €
Beknopt overzicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Op voorraad - verzending 1-2 dagen
Vee Block Twin
ID: FV-VEETWIN
Prijs:  42,00 €
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Op voorraad - verzending 1-2 dagen
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prijs:  236,00 €
Beknopt overzicht:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Basisplaat comptabiliteit:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Op voorraad - verzending 1-2 dagen
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prijs:  9,00 €
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lengte:  20 mm
  • Diameter:  8 mm
Op voorraad - verzending 1-2 dagen
Cone Adjustable (M4)
ID: FV-CONEADJ
Prijs:  14,00 €
Beknopt overzicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Schroefdraad:  M4
Op voorraad - verzending 1-2 dagen
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prijs:  31,00 €
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Schroefdraad:  Without Thread
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prijs:  695,00 €
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Schroefdraad:  M8
Op voorraad - verzending 1-2 dagen
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Prijs:  32,00 €
Beknopt overzicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Lengte:  10 mm
  • Diameter:  8 mm
Op voorraad - verzending 1-2 dagen