text.skipToContent text.skipToNavigation

In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen

CMM

166 product(en) gevonden

3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)

ID: FC-160SS3-NF

Prijs: 1 360,00 €

Beknopt overzicht: Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.

Buitendiameter klemvoet (D1): 160mm
Klembereik buitenzijde (A): 1 - 150mm
Klembereik binnenzijde (I): 34 - 174mm
Materiaal: Roestvast staal
Bevestiging (G): M6

Levertijd 10-15 dagen

6-Jaw Chuck without Flange (Aluminium / D=125 mm)

ID: FC-125AL6-NF

Prijs: 1 090,00 €

Beknopt overzicht: Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.

Buitendiameter klemvoet (D1): 125mm
Klembereik: 5 - 156mm
Materiaal: Aluminium
Bevestiging (G): M5

Levertijd 10-15 dagen

6-Jaw Chuck without Flange (Aluminium / D=160 mm)

ID: FC-160AL6-NF

Prijs: 1 430,00 €

Beknopt overzicht: Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.

Buitendiameter klemvoet (D1): 160mm
Klembereik: 5 - 196mm
Materiaal: Aluminium
Bevestiging (G): M6

Levertijd 10-15 dagen

3-Jaw Chuck without Flange (Aluminium / D=240 mm)

ID: FC-240AL3-NF

Prijs: 3 160,00 €

Beknopt overzicht: Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.

Buitendiameter klemvoet (D1): 240mm
Klembereik buitenzijde (A): 1 - 288mm
Klembereik binnenzijde (I): 35 - 295mm
Materiaal: Aluminium
Bevestiging (G): M8

Levertijd 10-15 dagen

3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)

ID: FC-125SS3-NF

Prijs: 1 090,00 €

Beknopt overzicht: Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.

Buitendiameter klemvoet (D1): 125mm
Klembereik buitenzijde (A): 1 - 126mm
Klembereik binnenzijde (I): 32 - 122mm
Materiaal: Roestvast staal
Bevestiging (G): M5

Levertijd 10-15 dagen

Fixture Baseplate 300x400x12mm (M8)

ID: FX-BP300__400

Prijs: 884,00 €

Beknopt overzicht: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Schroefdraad: M8

Op voorraad - verzending 1-2 dagen

Tension Clamp (L = 39 mm)

ID: FX-CTSML

Prijs: 31,00 €

Beknopt overzicht: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

Schroefdraad: Without Thread

Op voorraad - verzending 1-2 dagen

Vee Block Twin

ID: FV-VEETWIN

Prijs: 42,00 €

Beknopt overzicht: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

Op voorraad - verzending 1-2 dagen

Standoff (D = 8 mm / L = 20 mm)

ID: FV-SO8__20

Prijs: 9,00 €

Beknopt overzicht: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Lengte: 20 mm
Diameter: 8 mm

Op voorraad - verzending 1-2 dagen

Hinge Pivot With Handle

ID: FX-PR30HINGE

Prijs: 47,00 €

Beknopt overzicht: The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.

Op voorraad - verzending 1-2 dagen

Tension Clamp (L = 66 mm)

ID: FX-CTMED

Prijs: 31,00 €

Beknopt overzicht: Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.

Schroefdraad: Without Thread

Op voorraad - verzending 1-2 dagen

Fixture Baseplate 300x300x12mm (M8)

ID: FX-BP300__300

Prijs: 695,00 €

Schroefdraad: M8

Op voorraad - verzending 1-2 dagen

Spring Nut (M8)

ID: FX-M8SPRGNUT

Prijs: 31,00 €

Beknopt overzicht: Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.

Op voorraad - verzending 1-2 dagen

Spring Pusher Standoff Clamp (D=16mm / L=20mm)

ID: FX-LATMED

Prijs: 42,00 €

Beknopt overzicht: The lateral clamp comes with a tapered pressure button for easy positioning against a location face.

Lengte: 20 mm
Diameter: 16 mm

Op voorraad - verzending 1-2 dagen

Swift-Fix - Bronze Kit

ID: FX-BRONZE__KIT

Prijs: 968,00 €

Beknopt overzicht: The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Schroefdraad: M8
Toepassing: CMM, Draagbare meetarm

Op voorraad - verzending 1-2 dagen

Pillar 30x30x150mm

ID: FX-PR30__150

Prijs: 41,00 €

Beknopt overzicht: Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.

Grootte: 30 x 30 x 150 mm

Op voorraad - verzending 1-2 dagen

Standoff (D = 8 mm / L = 25 mm)

ID: FV-SO8__25

Prijs: 9,00 €

Beknopt overzicht: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.