text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo
  3. MMC

MMC

SWIFT-SET
SWIFT-SET
ID: GB0122-1000
Precio:  9 280,00 €
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon’s HP-S-X tactile scanning sensors.
  • Compatibilidad:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Tiempo de entrega 10-15 días
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Precio:  531,00 €
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Compatibilidad:  HP-S-X3 Stylus Clampings
  • Diámetro:  40mm
Tiempo de entrega 10-15 días
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Precio:  616,00 €
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Compatibilidad:  HP-S-X1 Stylus Clampings
  • Diámetro:  60mm
Tiempo de entrega 10-15 días
SWIFT-CHECK
SWIFT-CHECK
ID: GB0096-2001
Precio:  6 008,00 €
Descripción rápida:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Compatibilidad MMC:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Compatibilidad del software:  PC-DMIS (V2016 y superiores) , QUINDOS (Q7R18351 y superiores)
  • Tiempos de ejecución:  Comprobación de longitud: 20 Minutos, Comprobación de anillo: 5 Minutos, Comprobación de esfera: 5 Minutos, Comprobación del cabezal indexable / sensor: 10 Minutos
  • Dimensiones:  Barra de longitud = 300 mm, Diametro del anillo = 25 mm, Diametro de la esfera = 25 mm
Tiempo de entrega 10-15 días
Kinematic Support Kit
Kinematic Support Kit
ID: FX-KINKIT
Precio:  286,00 €
Descripción rápida:  The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
En Stock - Envío 1-2 Días
Resting Cone (M8)
Resting Cone (M8)
ID: FX-CONE
Precio:  23,00 €
Descripción rápida:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Rosca:  M8
En Stock - Envío 1-2 Días
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Precio:  1 656,00 €
Descripción rápida:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
En Stock - Envío 1-2 Días
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Precio:  43,00 €
Descripción rápida:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Tamaño:  30 x 30 x 100 mm
En Stock - Envío 1-2 Días
Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Precio:  2 076,00 €
Descripción rápida:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Rosca:  M8
En Stock - Envío 1-2 Días
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Precio:  15,00 €
Descripción rápida:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Longitud:  10 mm
  • Diámetro:  8 mm
En Stock - Envío 1-2 Días
Pillar 30x30x200mm
Pillar 30x30x200mm
ID: FX-PR30__200
Precio:  50,00 €
Descripción rápida:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Tamaño:  30 x 30 x 200 mm
En Stock - Envío 1-2 Días
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Precio:  56,00 €
Descripción rápida:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
En Stock - Envío 1-2 Días
Universal Clamp (M8)
Universal Clamp (M8)
ID: FX-CLAMP
Precio:  122,00 €
Descripción rápida:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Rosca:  M8
En Stock - Envío 1-2 Días
Vee Block Single
Vee Block Single
ID: FV-VEE
Precio:  33,00 €
Descripción rápida:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
En Stock - Envío 1-2 Días
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Precio:  17,00 €
Descripción rápida:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Rosca:  M4
En Stock - Envío 1-2 Días
Swift-Fix - Basic Kit
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Precio:  516,00 €
Descripción rápida:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Rosca:  M8
  • Aplicación:  MMC, Brazo medición portátil
En Stock - Envío 1-2 Días
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Precio:  15,00 €
Descripción rápida:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Rosca:  M4
En Stock - Envío 1-2 Días
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
ID: FC-160AL6
Precio:  1 630,00 €
Descripción rápida:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  160mm
  • Area de fijación:  5 - 196mm
  • Material:  Aluminio
  • Fijación:  M4 / M8
En Stock - Envío 1-2 Días
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
ID: FC-240AL3
Precio:  3 762,00 €
Descripción rápida:  Three-jaw chuck made from aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  240mm
  • Area de fijación exterior (A):  1 - 288mm
  • Area de fijación interior (I):  35 - 295mm
  • Material:  Aluminio
  • Fijación:  M8
En Stock - Envío 1-2 Días
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Precio:  1 630,00 €
Descripción rápida:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diámetro exterior mandril (D1):  160mm
  • Area de fijación exterior (A):  1 - 150mm
  • Area de fijación interior (I):  34 - 174mm
  • Material:  Acero inoxidable
  • Fijación:  M4 / M8
En Stock - Envío 1-2 Días